Wireless Broadband Router User Manual
provided by the ISP.
∙For cable users, if your ISP requires a registered Ethernet card MAC address, make sure you have cloned the network adapter’ s MAC address to the WAN port of the router. (See the MAC Address field in WAN page.)
My wireless client cannot communicate with another Ethernet computer.
∙Ensure the wireless adapter functions properly. You may open the Device Manager in Windows to see if the adapter is properly installed.
∙Make sure the wireless client uses the same SSID and security settings (if enabled) as the Wireless Broadband Router.
∙Ensure that the wireless adapter’ s TCP/IP settings are correct as required by your network administrator.
∙If you are using a 802.11b wireless adapter, check that the
54gTM Mode item, in Wireless LAN (2.4G) page, is not configured to use 54g Performace.
∙Use the ping command to verify that the wireless client is able to communicate with the router’ s LAN port and with the remote computer. If the wireless client can successfully ping the router’ s LAN port but fails to ping the remote computer, then verify the TCP/IP settings of the remote computer.
50
