Wireless Broadband Router User Manual
∙Wireless Bridge. Provides wireless connectivity between two or more wired segment. When operating as Wireless Bridge, the device does not accept association request from wireless stations. All bridging devices must use the same channel in order to communicate with each other.
Figure 4-13 Wireless Bridge Mode
Bridge Restrict: Select whether to enable or disable this function. When set to enabled, all devices operating in Wireless Bridge mode must have others’ Wireless Interface MAC addresses in their respective Remote Bridges table in order to establish the connection with each other (more secure). When set to disabled, only one device is required to have the Remote Bridges table filled with the Wireless Interface MAC address of other Wireless Broadband Router in order to establish the connection.
Remote Bridges: Enter the Wireless Interface’ s MAC address of the remote Wireless Broadband Router in this field. The remote device should also enter this Access Point’ s MAC address in its Remote Bridges table if the Bridge Restrict is enabled. Enter up to four MAC address of the remote bridge. To find the MAC address of this device, see Wireless Interface, in the beginning of this section.
33
