Wireless LAN Security, Network Authentication | Airlink RT210W

Wireless Broadband Router User Manual

wireless clients to share the network. In other words, it improves

wireless network efficiency and boosts throughput.

Figure 4-14 Wireless LAN (2.4 GHz)

4.7 Wireless LAN Security

This page configures the wireless security mode.

uNetwork Authentication

Network Authentication: Disabled by default. If the local network has an authentication server such as Radius server, the user can

36

Image 46

Airlink RT210W user manual Wireless LAN Security, Network Authentication

Contents

Page Disclaimer Trademarks Safety Instructions For Service FCC Information Page Contents Troubleshooting Specification Appendix a List of Figures Page Introduction Overview Features ∙ NAT Package Contents System RequirementsPage Physical Outlook LED IndicatorFront Panel Rear Panel and Connector Rear Panel and Connector Choosing a Place for the Wireless Broadband Router Hardware Connection Connecting Cable/ADSL Modem to the WAN port Connecting the Wireless Broadband RouterConnecting wired device to the LAN port Connecting the power adapter Figure below illustrates a connection diagram example Page Configuring Local Computer to Access the Wireless Router For Windows 98/ME Setting up TCP/IPOption a Using Dhcp Control Panel ∙ On the IP Address tab, select Specify an IP address Option B Using Fixed IP Address192.168.1.1 For Windows 2000/XP Check/Renew IP Address under Windows 98/ME ∙ Default Gateway Select Use the following IP address and enter these ∙ Authentication Open Additional Settings for Wireless ClientCheck/Renew IP Address under Windows 2000/XP Checking Connection with the Wireless Broadband Router For example C\ping Request time out Destination host unreachable Web Configuration Accessing Web-Based Configuration Utility Making the Changes Effective Applying Changes System Overview Router Mode General Information System Overview Bridge Mode WAN Configuration Router Mode Part 1 Configuring general settings Dhcp Client Part 2. Configuring protocol-specific settingsPPPoE Client WAN Configuration PPPoE Client WAN Configuration Bridge Mode Manual Config Enabling Bridging Mode LAN Configuration Dhcp Server Router Mode Only LAN Spanning Tree Protocol Router Mode Only LAN Configuration Router Mode Viewing Current Dhcp Assignments Router Mode Only 11 Dhcp Lease Table Wireless LAN 2.4G Configuration Basic Configuration Wireless Bridge 12 Access Point Mode 13 Wireless Bridge Mode Access Control Advanced ConfigurationPage Wireless LAN Security Network Authentication WEP Format Minimum CharactersNetwork Key fields Key Length HEX Format Ascii Format 64 Bit Hexadecimal digits Ascii characters 128 Bit 15 Wireless LAN Security General Filters Router Mode OnlyConnection Logging LAN MAC Filter LAN Client Filter Forwarding Router Mode Only 16 Filters Description DMZ IP AddressPort Forwards Application Specific Port Forwards Static Routes Administration System Clock Management Setup Firmware Upgrade Current Firmware version field Restore Factory DefaultsSystem Page Troubleshooting Page Interface Power Adapter and Environmental RequirementHardware Physical Router Features WAN Port FeaturesLAN Port Features Software Wireless LAN Features Security FeaturesConfiguration and Management Features Technical Support