Linksys SPA962 Provisioning Tab, Regional Tab, Call Progress Tones, SPA9x2 Phone Field Reference

SPA9x2 Phone Field Reference

Provisioning Tab

Parameter	Description
Multicast Address	The multicast address is used by the SPA9000 to
	communicate with the Linksys IP IP phones.
	Defaults to 224.168.168.168:6061.
Force LAN Codec	The choices are: none, G.711u, or G.711a. Defaults to
	none.

Provisioning Tab

For information about the Provisioning page, see the Linksys SPA Provisioning Guide.

Regional Tab

This section describes the fields for the following headings on the Regional tab:

•Call Progress Tones, page -141

•Distinctive Ring Patterns, page -144

•Control Timer Values (sec), page -145

•Vertical Service Activation Codes, page -145

•Vertical Service Activation Codes, page -145

•Outbound Call Codec Selection Codes, page -151

•Miscellaneous, page -153

Call Progress Tones

Parameter	Description
Dial Tone	Prompts the user to enter a phone number.
	Defaults to 350@-19,440@-19;10(*/0/1+2).
Outside Dial Tone	Alternative to the Dial Tone. It prompts the user to enter
	an external phone number, as opposed to an internal
	extension. It is triggered by a, (comma) character
	encountered in the dial plan.
	Defaults to 420@-16;10(*/0/1).

Linksys SPA9x2 Phone Administration Guide 141