Linksys SPA962 Configuring a SIP Proxy Server, Select Admin Advanced, Parameter, Description

Customizing SPA9x2 Extensions

Configuring a SIP Proxy Server

Parameter	Description
Make Call Without Reg	Enables making outbound calls without successful (dynamic)
	registration by the phone. If set to no, the dial tone plays only
	when registration is successful.
	Defaults to no.
Register Expires	Enables answering inbound calls without successful (dynamic)
	registration by the phone. If the proxy responds to a REGISTER
	with a lower expires value, the phone renews registration based
	on that lower value instead of the configured value.
	If registration fails with an “Expires too brief” error response, the
	phone retries with the value specified in the Min-Expires header
	of the error.
	Defaults to 60 seconds.
Ans Call Without Reg	If enabled, the user does not have to be registered with the
	proxy to answer calls.
	Defaults to no.
Use DNS SRV	Enables DNS SRV lookup for the proxy and outbound proxy.
	Defaults to no.
DNS SRV Auto Prefix	Enables the phone to automatically prepend the proxy or
	outbound proxy name with _sip._udp when performing a DNS
	SRV lookup on that name.
	Defaults to no.
Proxy Fallback Intvl	Sets the delay after which the phone retries from the highest
	priority proxy (or outbound proxy) after it has failed over to a
	lower priority server.
	The phone should have the primary and backup proxy server list
	via DNS SRV record lookup on the server name. It needs to know
	proxy priority; otherwise, it does not retry.
	Defaults to 3600 seconds.
Proxy Redundancy Method	Select Normal or Based on SRV port. The phone creates an
	internal list of proxies returned in the DNS SRV records.
	If you select Normal, the list contains proxies ranked by weight
	and priority.
	If you select Based on SRV, the phone uses normal, then inspects
	the port number based on the first-listed proxy port.
	Defaults to Normal.

Configuring a SIP Proxy Server

You can configure SIP proxy servers in the Proxy and Registration section of the EXT tabs:

1.Select Admin > Advanced.

2.Enter your service provider name in the Proxy field.

Linksys SPA9x2 Phone Administration Guide 101