Linksys SPA932, SPA962 RTP Parameters, SIT2 Tone Defaults to blank, SIT3 Tone Defaults to blank

	SPA9x2 Phone Field Reference
	SIP Tab
Parameter	Description
SIT2 RSC	SIP response status code to INVITE on which to play the
	SIT2 Tone.
	Defaults to blank.
SIT3 RSC	SIP response status code to INVITE on which to play the
	SIT3 Tone.
	Defaults to blank.
SIT4 RSC	SIP response status code to INVITE on which to play the
	SIT4 Tone.
	Defaults to blank.
Try Backup RSC	SIP response code that retries a backup server for the
	current request.
	Defaults to blank.
Retry Reg RSC	Interval to wait before the SPA9x2 retries registration
	after failing during the last registration.
	Defaults to blank.
RTP Parameters
Parameter	Description
RTP Port Min	Minimum port number for RTP transmission and
	reception. <RTP Port Min> and <RTP Port Max> should
	define a range that contains at least 4 even number
	ports, such as 100 – 106.
	Defaults to 16384.
RTP Port Max	Maximum port number for RTP transmission and
	reception.
	Defaults to 16482.
RTP Packet SizeSPA901	Packet size in seconds, which can range from 0.01 to
	0.16. Valid values must be a multiple of 0.01 seconds.
	Defaults to 0.030.
Max RTP ICMP Err	Number of successive ICMP errors allowed when
	transmitting RTP packets to the peer before the SPA9x2
	terminates the call. If value is set to 0, the SPA9x2 ignores
	the limit on ICMP errors.
	Defaults to 0.

Linksys SPA9x2 Phone Administration Guide 135