Linksys SPA942, SPA962 SPA9x2 Phone Field Reference, Regional Tab, Feature Dial Services Codes

SPA9x2 Phone Field Reference

Regional Tab

Parameter	Description
Feature Dial Services Codes	These codes tell the SPA9x2 what to do when the user is
	listening to the first or second dial tone.
	One or more *code can be configured into this
	parameter, such as *72, or *72*74*67*82, etc. Max total
	length is 79 chars. This parameter applies when the user
	has a dial tone (first or second dial tone). Enter *code
	(and the following target number according to current
	dial plan) entered at the dial tone triggers the SPA9x2 to
	call the target number prepended by the *code. For
	example, after user dials *72, the SPA9x2 plays a prompt
	tone awaiting the user to enter a valid target number.
	When a complete number is entered, the SPA9x2 sends a
	INVITE to *72<target_number> as in a normal call. This
	feature allows the proxy to process features like call
	forward (*72) or BLock Caller ID (*67).
	The *codes should not conflict with any of the other
	vertical service codes internally processed by the
	SPA9x2. You can empty the corresponding *code that
	you do not want to SPA9x2 to process.
	You can add a parameter to each *code in Features Dial
	Services Codes to indicate what tone to play after the
	*code is entered, such as *72‘c‘*67‘p‘. Below are a list of
	allowed tone parameters (note the use of back quotes
	surrounding the parameter w/o spaces)
	• c = Cfwd Dial Tone
	• d = Dial Tone
	• m = MWI Dial Tone
	• o = Outside Dial Tone
	• p = Prompt Dial Tone
	• s = Second Dial Tone
	• x = No tones are place, x is any digit not used
	above
	If no tone parameter is specified, the SPA9x2 plays
	Prompt tone by default.
	If the *code is not to be followed by a phone number,
	such as *73 to cancel call forwarding, do not include it in
	this parameter. In that case, simple add that *code in the
	dial plan and the SPA9x2 send INVITE *73@..... as usual
	when user dials *73.

Linksys SPA9x2 Phone Administration Guide 150