Linksys SPA932, SPA962, SPA942, SPA922 manual User Tab, Dial Plan, SPA9x2 Phone Field Reference

SPA9x2 Phone Field Reference

User Tab

Since two G.723.1/G.726 resources are available per SPA9x2, you should disable the use of G.729a to guarantee support for two simultaneous G.723/G.726 codecs.

Dial Plan

The default dial plan script for each line is as follows: (*xx[3469]11000[2-9]xxxxxx1xxx[2- 9]xxxxxxxxxxxxxxxxxx.). For more information, see Appendix B "Configuring a Dial Plan".

Parameter	Description
Dial Plan	Dial plan script for this line.
	The dial plan syntax is expanded in the SPA to allow the
	designation of three parameters to be used with a
	specific gateway:
	• uid – the authentication user-id
	• pwd – the authentication password
	• nat – if this parameter is present, use NAT
	mapping
	Each parameter is separated by a semi-colon (;).
	Furthermore, it recognizes gw0, gw1, …, gw4 as the
	locally configured gateways, where gw0 represents the
	local PSTN gateway in the same unit.
	Example 1:
	*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=
	xyz
	Example 2:
	*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
	Example 3:
	[39]11<:@gw0>
Enable IP Dialing	Enable or disable IP dialing.
	Defaults to no.

User Tab

This section describes the fields for the following headings on the User tab:

Linksys SPA9x2 Phone Administration Guide 175