Linksys SPA962 Using the SPA932 Sidecar, ”Configuring the SPA9000 for the SPA932” section on page

10 Using the SPA932 Sidecar

Using the SPA932 Sidecar

The SPA932 is a 32-button attendant console for the SPA962. This section applies only to SPA962 phones with SPA932 sidecar attachments.

The SPA932 connects to the SPA962 with the attachment arm provided (not shown). It obtains power directly from the SPA962 and does not require a separate power supply. Two SPA932 units can be attached to a single SPA962 to monitor a total of 64 separate lines.

For more information about installing and configuring the SPA932 with LVS, see the Linksys Voice

System Installation and Configuration Guide.

•”Configuring the SPA9000 for the SPA932” section on page 115

•”Configuring the Broadsoft Server for the SPA932” section on page 115

•”Configuring the Asterisk Server for the SPA932” section on page 116

•”Configuring the SPA932” section on page 117

•”Unit/Key Configuration Scripts” section on page 118

•”SPA932 Parameter Notes” section on page 120

•”Monitoring the SPA932” section on page 121

SPA932 features include:

•32 programmable speed-dial or direct station select (DSS) buttons/LEDs

•Three-color LEDs (red, green, and amber)

•Support for Broadsoft Busy Lamp

•Support for Asterisk Line Monitoring

•Illuminated line status monitoring (Idle, Ringing, Busy, Null, or Registration Error)

•One-touch Call Transfer--Incoming calls can be immediately transferred to the target destination by pressing a button/key as assigned on the SPA932.

Linksys SPA9x2 Phone Administration Guide 113