Linksys SPA932 Status, script is described in ”Unit/Key Configuration Scripts”, General

Models: SPA942

1 196
Download 196 pages 29.34 Kb
Page 186
Image 186
SPA932 Status

SPA9x2 Phone Field Reference

SPA932 Status

General

Parameter

Description

 

 

Subscribe Expires

Specifies how long the subscription remains valid. After the

 

specified period of time, elapses, the SPA932 initiates a new

 

subscription.

 

Defaults to 1800.

 

 

Subscribe Retry Interval

Specifies the length of time to wait to try again if subscription

 

fails.

 

 

Unit 1 Enable

Enables or disables the first SPA932 unit (each SPA962 can

 

have up to two SPA932s attached).

 

 

Subscribe Delay

Length of delay before attempting to subscribe.

 

Defaults to 1.

 

 

Unit 2 Enable

Enables or disables the second SPA932 unit (each SPA962 can

 

have up to two SPA932s attached).

 

 

Server Type

Selects the type of server used (SPA9000, Broadsoft, or

 

Askterisk).

 

 

Test Mode Enable

Enables or disables test mode. When test mode is enabled, the

 

LEDs are turned on when keys are pressed, going from off to

 

green to red, and back to off. In test mode, when all the

 

buttons on the sidecar are returned to off, all the keys become

 

amber. The SPA962 must be rebooted after the test is

 

completed.

 

 

Call Pickup Code

The star code used for picking up a ringing call.

 

Defaults to *98.

 

 

Unit 1 Key 1-32

Enter a strings that define the extension and other parameters

 

associated with each lighted button on the first SPA932 unit.

 

Keywords and values are case-sensitive. The configuration

 

script is described in ”Unit/Key Configuration Scripts”

 

section on page 118..

 

 

For more information, see ”Setting Up the SPA932 Sidecar” section on page 114.

Unit 2

See the description for Unit 1 above. Enter a strings that define the extension and other parameters associated with each lighted button on the second SPA932 unit. Keywords and values are case-sensitive. The configuration script is described in ”Unit/Key Configuration Scripts” section on page 118.

SPA932 Status

This page provides two tabs to display the status of up to two SPA932 units that are supported by a single SPA962:

Linksys SPA9x2 Phone Administration Guide

179

Page 186
Image 186
Linksys manual SPA932 Status, script is described in ”Unit/Key Configuration Scripts”, SPA9x2 Phone Field Reference