Manuals / Linksys / Communications / Telephone

Linksys SPA962, SPA942 Control Timer Values sec, Vertical Service Activation Codes, Regional Tab

Models: SPA942

1 196

Download 196 pages 29.34 Kb

Page 152

Control Timer Values (sec)

SPA9x2 Phone Field Reference

Regional Tab

Control Timer Values (sec)

Parameter	Description

Reorder Delay	Delay after far end hangs up before reorder tone is
	played. 0 = plays immediately, inf = never plays. Range:
	0–255 seconds.
	Defaults to 255.

Call Back Expires	Expiration time in seconds of a call back activation.
	Range: 0–65535 seconds.
	Defaults to 1800.

Call Back Retry Intvl	Call back retry interval in seconds. Range: 0–255
	seconds.
	Defaults to 30.

Call Back Delay	Delay after receiving the first SIP 18x response before
	declaring the remote end is ringing. If a busy response is
	received during this time, the SPA9x2 still considers the
	call as failed and keeps on retrying.
	Defaults to 0.5.

Interdigit Long Timer	Long timeout between entering digits when dialing. The
	interdigit timer values are used as defaults when dialing.
	The Interdigit_Long_Timer is used after any one digit, if
	all valid matching sequences in the dial plan are
	incomplete as dialed. Range: 0–64 seconds.
	Defaults to 10.

Interdigit Short Timer	Short timeout between entering digits when dialing. The
	Interdigit_Short_Timer is used after any one digit, if at
	least one matching sequence is complete as dialed, but
	more dialed digits would match other as yet incomplete
	sequences. Range: 0–64 seconds.
	Defaults to 3.

Vertical Service Activation Codes

The following Vertical Service Activation Codes are automatically appended to the dial-plan.

Linksys SPA9x2 Phone Administration Guide

145

Image 152

Linksys SPA962 Control Timer Values sec, Vertical Service Activation Codes, SPA9x2 Phone Field Reference, Regional Tab

Contents

Linksys SPA9x2 Phone Administration Guide ADMINISTRATION GUIDEInterim version released June 2008 to be updated August BUSINESS SERIESChapter 2 Getting Started Table of ContentsChapter 1 Introducing Linksys SPA9x2 Phones Chapter 3 Setting System Features Chapter 4 Setting SIP ParametersChapter 5 Provisioning Basics Table of ContentsTable of Contents Chapter 6 Setting Regional ParametersChapter 7 Customizing SPA9x2 Phones Chapter 10 Using the SPA932 Sidecar Chapter 8 Customizing SPA9x2 ExtensionsChapter 9 Customizing Users Table of ContentsChapter 11 SPA9x2 Phone Field Reference Table of ContentsAppendix B Configuring a Dial Plan Appendix A Creating an LED ScriptAppendix C Contacts Table of ContentsIntroducing Linksys SPA9x2 Phones Read Me FirstIntroducing Linksys SPA9x2 Phones Finding Text in a PDFRelated Documentation 6. Click SearchIntroducing Linksys SPA9x2 Phones Read Me FirstBasic Phone Features ”Basic Phone Features” section on page”Additional Phone Features” section on page ”SPA9x2 Phone Configuration Scenarios” section on pageAdditional Phone Features Additional Phone FeaturesSPS932 Sidecar Attendant for the SPA962 Introducing Linksys SPA9x2 PhonesIntroducing Linksys SPA9x2 Phones Features Requring SIP SupportAdditional Phone Features Introducing Linksys SPA9x2 Phones SPA9x2 Phone Configuration ScenariosSPA9x2 Phone Configuration Scenarios Introducing Linksys SPA9x2 Phones SPA9000 IP PBX SystemSPA9000 IP PBX System Linksys SPA9x2 Phone Administration Guide PSTN switch UserD 1 to 4 DID linesSIP-PSTN UserBGateway Switch Internet WAN Interface Introducing Linksys SPA9x2 PhonesSession Initiation Protocol and SPA9x2 Phones SIP Over TCPSession Initiation Protocol and SPA9x2 Phones Introducing Linksys SPA9x2 PhonesUsing SPA9x2 Phones with a Firewall or Router Using SPA9x2 Phones with a Firewall or RouterSIP Proxy Redundancy Introducing Linksys SPA9x2 Phones”Routers and Service Provider Support of NAT” section on page Network Address Translation and SPA9x2 PhonesNetwork Address Translation and SPA9x2 Phones Introducing Linksys SPA9x2 PhonesRouters and Service Provider Support of NAT STUN Server Enable see ”NAT Support Parameters” section on pageSession Border Controllers ”Session Border Controllers” section on pageSimple Traversal of UDP Through NATs STUN SIP-NAT InteroperationSimple Traversal of UDP Through NATs STUN Introducing Linksys SPA9x2 PhonesUsing SPA9x2 Phones in a VLAN Using SPA9x2 Phones in a VLAN3. Click Admin Login advanced Determining the Type of NAT Used on Your RouterShows information about the interfaces your router uses Using SPA9x2 Phones in a VLANIntroducing Linksys SPA9x2 Phones ”Using the Phone Display and Buttons” section on page ”Using the LCD Screen” section on page”Using the Web User Interface” section on page ”Using the Personal Directory” section on pageDownloading the Firmware Upgrading SPA9x2 FirmwareDownloading the Firmware Getting StartedGetting Started Using the Phone Display and ButtonsUsing the Phone Display and Buttons see Appendix A Creating an LED Script Using the Phone Display and ButtonsPhone Feature Getting StartedGetting Started Using the LCD ScreenUsing the Web User Interface Getting Started Administrator and User ViewsUsing the Web User Interface Administrator Privileges Admin Login Web Pageshttp//phone.ip.address/admin Using the Web User InterfaceUsing the Personal Directory User Login Web PagesUsing the Personal Directory Basic and Advanced ViewsWeb Admin Tabs Setup 3 Call HistoryViewing Call History Caller and Called Name MatchingRoadmap to Web UI Features Roadmap to Web UI FeaturesSee Chapter 3, Setting System FeaturesSee Chapter 6, Setting Regional See Chapter 5, ProvisioningSee Chapter 7, Customizing SPA9x2 PhonesObtaining Phone Information Info Tab Obtaining Phone Information Info TabSidecar See ”System and ProductSystem and Product Information Product Information NotesSystem and Product Information ”Line and Call Status Information”Phone Status Information Understanding Lines, Calls, and Shared Call AppearancesPhone Status Notes Phone Status InformationUnderstanding Extensions Shared Line or Call AppearancesUnderstanding Lines, Calls, and Shared Call Appearances Getting StartedExtension Status Information Line Key LEDsExtension Status Information Getting StartedLine and Call Status Information Extension Status NotesLine and Call Status Notes Line and Call Status InformationDownloaded Ring Tones What’s Next?Ring Tone Notes Downloaded Ring TonesWhat’s Next? Getting StartedSetting System Features Setting Security FeaturesSetting System Features Setting Security FeaturesSRTP and Securing Calls 4. Click Submt All ChangesSetting System Features Setting Security FeaturesEnsuring Voice Quality Supported CodecsSecure Call Indication Tone Ensuring Voice QualityEnsuring Voice Quality Bandwidth RequirementsSetting System Features Ensuring Voice Quality Factors Affecting Voice QualitySetting System Features Setting System Features Setting System Features”Setting a Static IP Address on the IP Phone” section on page Setting System FeaturesSetting System Configuration Information System Configuration NotesSetting System Configuration Information Setting System FeaturesSetting Internet, IP and PPPoE Information Setting a Static IP Address on the IP PhoneSetting Internet, IP and PPPoE Information DHCP and PPPoE NotesSetting Optional Network Parameters Optional Network Configuration NotesSetting Optional Network Parameters Setting System FeaturesConfiguring VLAN Settings VLAN Settings NotesConfiguring VLAN Settings Setting System FeaturesSetting SIP Parameters Setting SIP Parameters”SIP Parameters” section on page ”SIP Timer Values” section on page SIP ParametersSIP Parameter Notes Setting SIP ParametersSIP Parameters ParameterSetting SIP Parameters see Chapter 10, Using the SPA932 SidecarSIP Parameters ParameterSIP Timer Values SIP Timer NotesSIP Timer Values Setting SIP ParametersSetting SIP Parameters SIP Timer ValuesParameter Descriptionadded to the short timer REGISTER after a failure. RegRetryLongRandomDelayMinimum and maximum random delay to be added to the long Long Intvl when retrying REGISTER after a failureRTP Parameters Response Status NotesRTP Notes RTP ParametersSDP Payload Types NAT Support ParametersSDP Payload Parameters SDP Payload TypesLinksys Key System Parameters NAT Support Parameter NotesLinksys Key System Notes Linksys Key System Parameters”Upgrading, Resyncing, and Rebooting Phones” section on page ”Configuration Access Control” section on page”Using HTTPS” section on page ”Firmware Upgrade Parameters” section on pageSPA9x2 Configuration Profiles Provisioning Configuration from Phone KeypadSPA9x2 Configuration Profiles Provisioning BasicsUpgrading, Resyncing, and Rebooting Phones Upgrading, Resyncing, and Rebooting PhonesSPA9x2 web UI Provisioning Firmware Upgrade Upgrade Enable yes Upgrading Firmware on a PhoneRebooting a Phone Resyncing a PhoneUpgrading, Resyncing, and Rebooting Phones Provisioning BasicsRedundant Provisioning Servers Retail Provisioninghttps//prov.supervoip.com/linksys-init Redundant Provisioning ServersConfiguration Access Control Using HTTPSAutomatic In-House Preprovisioning Automatic In-House PreprovisioningFirmware Upgrade Parameters Using HTTPSHow HTTPS Works Server CertificatesUsing HTTPS ProfileRule. Defines upgrade conditions and associated firmware URLsProvisioning Basics ParameterSample Configuration File Sample Configuration FileGeneral Purpose Parameters Provisioning BasicsSetting Regional Parameters Setting Regional Parameters”Control Timer Values sec” section on page ”Vertical Service Activation Codes Star Codes” section on pageAdvanced Scripting for Cadences, Call Progress Tones, and Ring Tones Setting Regional ParametersExample 1 Normal Ring Example 2 Distinctive Ring short,short,short,longSetting Regional Parameters Advanced Scripting for Cadences, Call Progress Tones, and Ring Tones1 = A classic phone with mechanical bell 2 = Typical phone ring Setting Regional ParametersAdvanced Scripting for Cadences, Call Progress Tones, and Ring Tones Call Progress Tones Call Progress Tones NotesCall Progress Tones Setting Regional ParametersControl Timer Values sec Control Timer Value NotesDistinctive Ring Patterns Ring Pattern NotesVertical Service Activation Codes Star Codes Vertical Service Activation Codes Star CodesSetting Regional Parameters FieldVertical Service Activation Codes Star Codes Vertical Service Activation Code NotesSetting Regional Parameters Referral Services Codes One or more * code can b* codee configured into this parameter, such as *98, or *97*98*123, and so on. The maximum total length is 79 characters Setting Regional ParametersVertical Service Activation Codes Star Codes Vertical Service Activation Codes Star Codes Using Star Codes to Activate/Deactivate ServicesSetting Regional Parameters Vertical Service Announcement Codes Disabling/Deactivating ServicesVertical Service Announcement Codes Setting Regional ParametersVertical Service Announcement Codes Vertical Service Announcement NotesSetting Regional Parameters Setting Regional Parameters Vertical Service Announcement Codes10 Do Not Disturb DDT DND enabled DDF DND disabled WDF CWCID disabled 13 Block Anonymous callConfiguring Daylight Savings Time” Daylight Saving Time Examples” Miscellaneous ParametersOutbound Call Codec Selection Codes Outbound Call Codec Selection NotesMiscellaneous Parameters DTMF NotesSetting Regional Parameters Localizing Your SPA9x2 Phone Managing the Time and DateLocalizing Your SPA9x2 Phone Setting Regional ParametersLocalizing Your SPA9x2 Phone Configuring Daylight Savings TimeSetting Regional Parameters Selecting a Language Daylight Saving Time ExamplesSelecting a Language Setting Regional ParametersSelecting a Language Creating a Dictionary Server ScriptSetting Regional Parameters Setting Regional Parameters Linksys SPA9x2 Phone Administration GuideSelecting a Language For example DictionaryServerScript ua=na”Using the Photo Album Feature on the SPA962” section on page ”Supplementary Services Parameters” section on page”Using Call Parking” section on page ”Using Call Pick Up and Group Call Pick Up” section on pageservice provider often hosts a voice mail service. The advantages of hosted voicemail includeCustomizing SPA9x2 Phones General Phone InformationUsing the Photo Album Feature on the SPA962 Changing the Display Background SPA942/9626. Click Submit All Changes Customizing SPA9x2 PhonesConfiguring Shared Line Extension on SPA9x2 Phones Line Key InformationLine Key Notes Line Key InformationMiscellaneous Line Key Settings Notes Line Key LED Pattern NotesCustomizing SPA9x2 Phones Line Key InformationCustomizing SPA9x2 Phones Line Key Information“c” indicates “color” the color of the LED “r” indicates “red” a red-colored LEDSupplementary Services Parameters Supplementary Services NotesSupplementary Services Parameters Customizing SPA9x2 PhonesSupplementary Services Parameters Enables/Disableseavesdrop on the conversation. To enable this feature the Call pick up feature see ”Using Call Pick Up and Group CallUsing Group Paging Using Call ParkingUsing Call Pick Up and Group Call Pick Up Supplementary Services ParametersCustomizing SPA9x2 Phones Ring Tone ParametersRing Tone Parameters Ring Tone Parameters Managing Ring TonesCustomizing SPA9x2 Phones Audio Input Gain dB and Extension Mobility Settings Using Extension MobilityAudio Input Gain dB and Extension Mobility Settings Extension Mobility NotesGeneral, Shared Line Appearance, and NAT Settings General, Shared Line Appearance, and NAT Settings”General, Shared Line Appearance, and NAT Settings” section on page ”Network Settings and SIP Settings” section on pageNAT Settings Notes General, Shared Line Appearance, and NAT SettingsCustomizing SPA9x2 Extensions ParameterNetwork Settings and SIP Settings Network Settings NotesSIP Settings Notes Network Settings and SIP SettingsIf this feature is enabled, the IP telephony ignores further Defaults to noWhen enabled, authorization is required for initial incoming StickyCall Feature Settings Call Feature NotesCall Feature Settings Customizing SPA9x2 ExtensionsCustomizing SPA9x2 Extensions Proxy and Registration ParametersProxy and Registration Parameters Configuring a SIP Proxy Server Configuring a SIP Proxy Server1. Select Admin Advanced Customizing SPA9x2 ExtensionsAudio Configuration Parameters Subscriber Information ParametersSubscriber Information Notes Subscriber Information ParametersAudio Configuration Parameters Customizing SPA9x2 ExtensionsAudio Configuration Notes Audio Configuration ParametersCustomizing SPA9x2 Extensions ParameterDefaults to yes Dial Plan ParametersDial Plan Parameters in outbound SDPDial Plan Notes See Appendix B Configuring a Dial Plan for more detailedCustomizing SPA9x2 Extensions Dial Plan ParametersCustomizing SPA9x2 Extensions Dial Plan ParametersParameter Description”Supplementary Services” section on page ”Setting RSS Newsfeeds on the SPA962 Phone” section on page”Web Information Service Settings SPA962 Only” section on page ”Audio Volume Settings” section on pageSupplementary Services Supplementary ServicesSupplementary Services Notes Customizing UsersSetting RSS Newsfeeds on the SPA962 Phone Web Information Service Settings SPA962 OnlySetting RSS Newsfeeds on the SPA962 Phone Customizing UsersAudio Volume Settings Web Information Service NotesTraffic Information Settings Audio Volume NotesPhone GUI Color Settings SPA962 Only Phone GUI Color Settings SPA962 OnlyPhone LCD Notes Customizing UsersUsing the SPA932 Sidecar Using the SPA932 Sidecar”Configuring the SPA9000 for the SPA932” section on page ”Configuring the Broadsoft Server for the SPA932” section on pageSetting Up the SPA932 Sidecar Setting Up the SPA932 SidecarUsing the SPA932 Sidecar Configuring the SPA9000 for the SPA932 Configuring the Broadsoft Server for the SPA932Using the SPA932 Sidecar Setting Up the SPA932 SidecarSetting Up the SPA932 Sidecar Configuring the Asterisk Server for the SPA932Using the SPA932 Sidecar Setting Up the SPA932 Sidecar Configuring the SPA932Using the SPA932 Sidecar Unit/Key Configuration Scripts 10. Click Submit All ChangesUsing the SPA932 Sidecar Setting Up the SPA932 SidecarSPA9000 Syntax Broadsoft syntaxUsing the SPA932 Sidecar Setting Up the SPA932 SidecarSPA932 Parameter Notes Asterisk syntaxUsing the SPA932 Sidecar Setting Up the SPA932 SidecarMonitoring the SPA932 SPA932 Unit Monitoring NotesMonitoring the SPA932 Using the SPA932 SidecarLine Station Subscribe Using the SPA932 SidecarMonitoring the SPA932 SPA9x2 Phone Field Reference Info TabSPA9x2 Phone Field Reference System InformationProduct Information Phone StatusIndicates any additional licenses that you have installed SPA9x2 Phone Field ReferenceExt Status SPA9x2 Phone Field ReferenceInfo Tab Total number of RTP packets sent including redundantInfo Tab Line /Call StatusSPA9x2 Phone Field Reference System Configuration System Configuration, pageInternet Connection Type and Static IP Settings, page Optional Network Configuration, page VLAN Settings, pageInternet Connection Type and Static IP Settings PPPoE SettingsLets you enable or disable local access to the web UIweb SPA9x2 Phone Field ReferenceOptional Network Configuration The debug server name and port. This feature specifiesSPA9x2 Phone Field Reference System TabVLAN Settings SIP Parameters, page SIP Timer Values sec, pageSIP Tab SIP ParametersSPA9x2 Phone Field Reference SIP TabNumber of times an invite can be redirected to avoid an this is not specified, the SIP User Agent Name is alsoEnables support for the Broadsoft Talk Package, which enables a user to answer or resume a call by clicking aEnables support for the Broadsoft Hold Package, which which enables a user to start a conference by clicking aSIP Timer Values sec SPA9x2 Phone Field ReferenceSIP Tab INVITE final response, time-out value, which can rangeResponse Status Code Handling Defaults to blank, which disables the exponential backSPA9x2 Phone Field Reference SIP TabRTP Parameters SPA9x2 Phone Field ReferenceSIP Tab reception. RTP Port Min and RTP Port Max shouldattempts to compute the round trip delay and show it as SPA9x2 Phone Field ReferenceSIP Tab connection. It can range from 0 to 255 seconds. DuringSDP Payload Types SPA9x2 Phone Field ReferenceSIP Tab RTP-Start-Loopback DynamicG711u Codec Name SPA9x2 Phone Field ReferenceSIP Tab SIP Tab NAT Support ParametersSPA9x2 Phone Field Reference SIP Tab Linksys Key System ParametersSPA9x2 Phone Field Reference Control Timer Values sec, page Vertical Service Activation Codes, pageProvisioning Tab Regional TabRegional Tab Played when a 486 RSC is received for an outbound callPlayed when a call is waiting. Defaults to 440@-1030.3 SPA9x2 Phone Field Referencean error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screenPlayed instead of the Dial Tone when there are unheard Played to all parties when a three-way conference call isDefaults to60.2/.4,.2/.4,.2/4 Defaults to 600.25/9.75Distinctive Ring Patterns SPA9x2 Phone Field ReferenceControl Timer Values sec Vertical Service Activation CodesLong timeout between entering digits when dialing. The The InterdigitLongTimer is used after any one digit, ifStarts a callback when the last outbound call is not busy SPA9x2 Phone Field ReferenceRegional Tab Forwards busy calls to the extension specified after theCW Per Call Act Code SPA9x2 Phone Field ReferenceRegional Tab Secure One Call Deact Code SPA9x2 Phone Field ReferenceRegional Tab Regional Tab Referral Services CodesSPA9x2 Phone Field Reference Regional Tab Feature Dial Services CodesSPA9x2 Phone Field Reference Vertical Service Announcement Codes SPA9x2 Phone Field ReferenceOutbound Call Codec Selection Codes Regional TabSPA9x2 Phone Field Reference Regional TabRegional Tab MiscellaneousSPA9x2 Phone Field Reference Regional Tab Daylight Savings Time EnableSPA9x2 Phone Field Reference Phone Tab Phone TabGeneral, page SPA9x2 Phone Field ReferenceLine Key, page Miscellaneous Line Key Settings, page Line Key LED Pattern, page Supplementary Services, pageGeneral Ring Tone, page Auto Input Gain dB, pagePhone Tab Line KeySPA9x2 Phone Field Reference Miscellaneous Line Key Settings Line Key LED PatternSPA9x2 Phone Field Reference Phone TabLED pattern when the Call Appearance is disabled not LED pattern during the Local Ringing state, when the callLED pattern during the Remote Ringing state, where the LED pattern during the Local Active state, where the callSupplementary Services LED Pattern when the corresponding extension is tryingSPA9x2 Phone Field Reference Phone TabRing Tone centers. Typically enabled with the SIP-B parameterSPA9x2 Phone Field Reference Phone TabPhone Tab Auto Input Gain dBSPA9x2 Phone Field Reference General, page Share Line Appearance, page NAT Settings, page Network Settings, page SIP Settings, page Call Feature Settings, pageExt Tab Extension MobilityAudio Configuration, page Dial Plan, page Share Line AppearanceSPA9x2 Phone Field Reference GeneralNAT Settings Network SettingsSPA9x2 Phone Field Reference Ext TabSIP Settings Controls how the jitter buffer should be adjusted. SelectSPA9x2 Phone Field Reference Ext TabExt Tab settings Referor, Refer Target, Referee, and Refer-ToSPA9x2 Phone Field Reference listen port. This feature controls which SIP messages to If this feature is enabled, the IP telephony ignores furtherresponse for an outbound INVITE. To enable this feature SPA9x2 Phone Field ReferenceCall Feature Settings server. When only a user ID is specified, the current oroutbound proxy is contacted. Music-on-hold is disabled Defaults to imusic when used with a SPA9000 IP PBXDefaults to Specifies whether to enable a SIP-B feature regarding theSPA9x2 Phone Field Reference Ext TabProxy and Registration SPA9x2 Phone Field ReferenceExt Tab Outbound Proxy is no or Outbound Proxy is emptySubscriber Information Using multiple DNS A record per server name does notSPA9x2 Phone Field Reference Ext TabAudio Configuration SPA9x2 Phone Field ReferenceExt Tab Preferred codec for all calls. The actual codec used in a call stillExt Tab To enable silence suppression so that silent audio frames areSPA9x2 Phone Field Reference User Tab Dial PlanUser Tab SPA9x2 Phone Field ReferenceCall Forward, page Speed Dial, page Supplementary Services, page Web Information Service Settings SPA962, pageTraffic Service Information Settings SPA962, page Audio Volume, page Phone GUI Menu Color Settings SPA962 only, pageWeb Information Service Settings SPA962 Traffic Service Information Settings SPA962Audio Volume Phone GUI Menu Color Settings SPA962 only932 Tab SPA962 only 932 Tab SPA962 onlyUnit 2, page -179General, page General, page Unit 2, page -179General Linksys SPA9x2 Phone Administration Guidescript is described in ”Unit/Key Configuration Scripts” SPA932 StatusUnit SPA932 StatusSPA9x2 Phone Field Reference SPA932 StatusUnit 1-Displays information about the first SPA932 sidecar unit subscription expires, the SPA932 automatically requests a newCreating an LED Script LED ScriptCreating an LED Script LED Script ExamplesLED Pattern Creating an LED ScriptDial Plan Digit Sequences Configuring a Dial PlanConfiguring a Dial Plan Dial Plan Rules Digit Sequence SyntaxElement Repetition Sub-sequence SubstitutionInterdigit Timer Master Override Local Timer OverridesL delay-valuespace P delay-value spaceDial Plan Timers Interdigit Long TimerInterdigit Short Timer InterdigitLongTimer defaults to InterdigitShortTimer defaults toDial Plans Configuring a Dial PlanContacts US/Canada ContactsEU Contacts Contacts8060952NC-EW