Bretford L16V Energy Saving 24 Hour Timer, Setting the 24 hour Clock, LED Indicator Lights Guide

Energy Saving 24 Hour Timer

All EcoCartTM models are fitted with an energy saving programmable 24 hour timer (ECO CART L30H models feature 2 individual timer units). Each timer features 2 timer options allowing you to set your unit to automatically start charging over 2 separate time periods in one 24 hour period. This could be from 6:30am to 8:30am ready for morning classes and then again at 12pm to 1pm ready for afternoon classes. The timer can also be set be set to charge your laptops during the evening or weekend to take advantage of off-peak energy supply hours, helping to reduce your electricity bills.

All ECO CART L30H models feature 2 individual timer units. Each of these units manages the charging time for 15 of the laptops charged inside the cabinet. This enables you to set the unit so that all 30 laptops charge at once or you can set different charging times for each set of 15 laptops. NOTE: Due to the built in power management system on the EcoCartTM, all 30 laptops can be charged at one time without the risk of tripping your building circuits.

Step 5: Setting the 24 hour Clock

First check the 24 hour clock is showing the correct time.

To adjust the time, press & hold the control knob in until the clock starts flashing (Minimum 10 seconds). Then turn the control knob until the correct time is reached & press the control knob in again to set.

LED Indicator Lights Guide:

	When this LED is ON, it indicates that the unit is receiving
Charging	power and charging is in progress. When flashing the
	charging start time is set and charging will commence
	within 2-3 minutes.
Timed Charging (Flashing)	When this LED is flashing it indicates that a timer selection
	has been made.
Timer 1: ON Time (Flashing: This timer ON)	When this LED is flashing it indicates that the unit is
	charging and that Timer 1 is selected.
Timer 1: OFF Time	This LED is normally OFF and only comes ON when setting
	the Charging Finish time of Timer 1.
Timer 2: ON Time (Flashing: This timer ON)	When this LED is flashing it indicates that the unit is
	charging and that Timer 2 is selected.
Timer 2: OFF Time	This LED is normally OFF and only comes ON when setting
	the Charging Finish time of Timer 2.

8