Sony Ericsson GM47, GM48 manual Error Codes

1. INTRODUCTION TO AT COMMANDS

Unsolicited Result Code

Unsolicited result codes indicate the occurrence of an event not directly associated with a command being issued from the TE.

1.3 Error Codes

1.3.1 +CME ERROR (Mobile Equipment Error Code)

This final result code is similar to the regular ERROR result code. If +CME ERROR: <err> is the result code for any of the commands in a command line, none of the commands in the same command line will be executed (neither ERROR nor OK result code shall be returned as a result of a completed command line execution). The format of <err> can be either numerical or alphabetical, and is set with the +CMEE command.

The table below provides the numerical values for the parameter <err>.

<err>	Description Syntax
0	Phone failure
1	No connection to phone
2	Phone -adaptor link reserved
3	Operation not allowed
4	Operation not supported
5	PH-SIM PIN required

10SIM not inserted

11SIM PIN required

12SIM PUK required

13SIM failure

14SIM busy

15SIM wrong

16Incorrect password

17SIM PIN2 required

18SIM PUK2 required

20Memory full

21Invalid index

22Not found

23Memory failure

24Text string too long

25Invalid characters in text string

85

LZT 123 7263 R1C