Sony Ericsson GM48 22 AT+CLAC List all available AT Commands, 23 AT+CMEE Mobile Equipment Error

GM47/GM48 INTEGRATOR’S MANUAL

3.22 AT+CLAC List all available AT Commands

Command	Possible Responses
+CLAC	<AT Command1> [<CR> <LF> <AT Command2>[…]]
	+CME ERROR: <err>
+CLAC=?	+CME ERROR: <err>

Causes the ME to return one or more lines of AT commands. This command has the same functionality as AT*.

Note! This command only returns the AT commands that are available to the user.

3.23 AT+CMEE Mobile Equipment Error

Description	Command	Possible Responses
Request GSM Mobile	AT+CMEE=[<n>]	• OK
Equipment Error		•	ERROR
Control
Show the current	AT+CMEE?	• +CMEE: <n>
setting		•	OK
		• ERROR
Show if the command	AT+CMEE=?	•	+CMEE: (list of
is supported			supported <n>s)

• OK

• ERROR

Disables or enables the use of result code +CME ERROR: <err> as an indication of an error relating to the functionality of the ME. When enabled, ME related errors cause +CME ERROR: <err> final result code instead of the regular ERROR final result code. ERROR is returned normally when error is related to syntax, invalid parameters, or TA functionality. For more information, refer to “+CME ERROR (Mobile Equipment Error Code)”, page 85.

<n>	Description
0	Disable +CME ERROR: <err> result code and use ERROR
	instead. Default value
1	Enable +CME ERROR: <err> result code and use numeric
	<err> values (see page 85)
2	Enable +CME ERROR: <err> result code and use verbose
	<err> values (see page 85)

116

LZT 123 7263 R1C