Sony Ericsson GM47, GM48 manual Read

11. INPUT/OUTPUT

*E2IO: 3,“I5”,1 (I5 triggered, current state ‘1’)

•Trigger Check (<op> = 5): Checks if a signal input is configured as a trigger. Returned <val> shows the current trigger state; ‘1’ for triggered or ‘0’ for not triggered. If the signal is triggerable, the current trigger status and OK are return, otherwise ERROR is returned.

AT*E2IO=5,“I5”

*E2IO: 5,“I5”,1 (I5 is currently set to trigger)

OK

The test command returns the supported I/Os and allowed value ranges. Abortability:

This command may not be aborted.

<op>	Description
0	Read
1	Write
2	Configure
3	Configure Check
4	Trigger
5	Trigger Check
<io>	Description
“IO1”	Digital Input 1. Supported Operations: 0,1,2,3,4,5
“IO2”	Digital Input 2. Supported Operations: 0,1,2,3,4,5
“IO3”	Digital Input 3. Supported Operations: 0,1,2,3,4,5
“IO4”	Digital Input 4. Supported Operations: 0,1,2,3,4,5
“I5”	Digital Input 5. Supported Operations: 0,4,5
“O5”	Digital Output 5. Supported Operations: 0,1
“O6”	Digital Output 6. Supported Operations: 0,1
“O7”	Digital Output 7. Supported Operations: 0,1
“DA1”	Digital/Analogue Input: Supported Operations: 0,1
“AD1”	Analogue/Digital Output 1: Supported Operations: 0
“AD2”	Analogue/Digital Output 2: Supported Operations: 0
“AD3”	Analogue/Digital Output 3: Supported Operations: 0

193

LZT 123 7263 R1C