Sony Ericsson GM47, GM48 manual Overview, Contents of the Kit

1. Introduction

1.1 Overview

The developer’s kit is designed to get you started quickly. It contains all the hardware you will need to begin the development of an application. The only items you need to provide are; a computer or micro controller, a SIM card and network subscription, and a knowledge of programming with AT commands.

Note! Before connecting up and using the developer’s kit, we strongly recommend you read “Part 3: Integrating the Module”, page 37 and all of this section. There are many switches, jumpers and connector options in the developer’s kit. A knowledge of the functionality of the GM47 module is therefore essential before you start altering the hardware settings.

The main hardware in the developer’s kit is a screened box, containing a board onto which you plug the GM47 module. Connectors, switches, jumpers and SIM card holder are provided to allow you to configure and access all the functions of the module.

1.2 Contents of the Kit

Please take the time to check the contents of your kit against the list shown below. If any of the items are missing contact your supplier immediately.

Developer’s kit - Part Number DPY 102 218 Contents:

Description	Product Number	Qty
Radio modem:	DPY 102 201	1
GM47 module or
GM48 module	DPY 102 204
GM47/GM48 developer’s kit (screened	KRY 101 1907	1
box and development board)
Switched mode PSU 12V d.c.	EPA-121DA-12	1
UK mains plug	EN90POWERLEADUK	1
European mains plug	EN90POWERLEADEU	1

25

LZT 123 7263 R1C