Sony Ericsson GM48, GM47 manual 25 AT+CPAS Phone Activity Status, At+Cpas=?

GM47/GM48 INTEGRATOR’S MANUAL

	<ind>	Description
	0	No indicator event reporting
	1	Indicator event reporting using result code +CIEV:
		<ind>,<value>. <ind> indicates the indicator order number
		(as specified for +CIND) and <value> is the new value of
		indicator. Only those indicator events, which are not
		caused by +CIND shall be indicated by the TA to the TE
	<bfr>	Description
	0	TA buffer of unsolicited result codes defined within this
		command is cleared when <mode> 1...3 is entered
	Unsolicited Result Codes:
	+CKEV: <key>,<press>
	+CIEV: <ind>,<value>
3.25 AT+CPAS	Phone Activity Status
	Description		Command	Possible Responses
	Execute Phone Activity		AT+CPAS[=<mode>]	•	+CPAS: <pas>
	Status			•	+CME ERROR <err>
				• OK
				• ERROR
	Show if the command		AT+CPAS=?	• +CPAS:
	is supported				(list of supported
					<pas>s)

• +CME ERROR <err>

• OK

• ERROR

Returns the activity status <pas> of the ME. It can be used to interrogate the ME before requesting action from the phone.

When the command is executed without the <mode> argument, the command returns <pas> values from 0 to 128 (for supported values see table below). When, on the other hand, the command is executed with the <mode> argument set to 1, the command may return Ericsson specific <pas> values from 129 to 255 (for supported values see the table below).

118

LZT 123 7263 R1C