Sony Ericsson GM48, GM47 manual 12 AT*EDST Ericsson Daylight Saving Time, Ecam, At*Edst?, At*Edst=?

GM47/GM48 INTEGRATOR’S MANUAL

<exitcause>	Description
Integer	Exit cause according to GSM 04.08 reported when
	returning to Idle state (<ccstatus> = 0)
<number>	Description
String	String type phone number of format specified by <type>.
	Only valid for <ccstatus> = 1 (Calling)
<type>	Description
	Type of address octet in integer format (refer to GSM
	04.08, subclause 10.5.4.7)

129ISDN/Telephony numbering plan, national/international unknown. Default if no “+” in sca

145ISDN/Telephony numbering plan, international number.

Default if “+” in sca.

	161	ISDN/Telephony numbering plan, national number
	128 to 255	Other values refer to GSM 04.08 section 10.5.4.7. Only valid
		for <ccstatus> = 1 (Calling)
Examples
	AT*ECAM?
	*ECAM: 0
	AT*ECAM=1
	OK
3.12 AT*EDST	Ericsson Daylight Saving Time

Description	Command	Possible Responses
Set Daylight Saving	AT*EDST=<dst>	•	+CME ERROR: <err>
Time		• OK
		• ERROR
Show the current	AT*EDST?	•	*EDST: <dst>
setting		•	+CME ERROR: <err>
		• OK
		• ERROR
Show if the command	AT*EDST=?	•	*EDST: (list of
is supported			supported <dst>s)

• +CME ERROR: <err>

• OK

• ERROR

This command sets the daylight saving time hours.

108

LZT 123 7263 R1C