Sony Ericsson GM48, GM47 manual 12.10 AT+CRES Restore SMS Settings, Parameters, cannot be restored

GM47/GM48 INTEGRATOR’S MANUAL

12.10 AT+CRES	Restore SMS Settings
	Description	Command	Possible Responses
	Restore settings	AT+CRES[=<profile>]	•	+CMS ERROR: <err>
			• OK
			• ERROR
	Show if the command AT+CRES=?		•	+CRES: (list of
	is supported			supported
				<profile>s)
			•	+CMS ERROR: <err>
			• OK
			• ERROR
	Restores message service settings from non-volatile memory to active
	memory. A TA can contain several profiles of settings. Settings
	specified in commands Service Centre Address +CSCA, Set Message
	Parameters +CSMP and Select Cell Broadcast Message Types +CSCB
	(if implemented) are restored. Certain settings, such as SIM SMS
	parameters, cannot be restored.
	<profile>	Description
	0..2	Profile number where settings are to be stored. Default
		value is 0
12.11 AT+ICF	Cable Interface Character Format
	Description	Command	Possible Responses
	Defines DTE-DCE	AT+ICF=[format[,parity]]	•	OK
	character framing		•	ERROR
	Show the current	AT+ICF?	•	+ICF:
	setting			<format>,<parity>
			• OK
			• ERROR
	Show if the	AT+ICF=?	•	+ICF: (list of
	command is			supported
	supported			<format>s), (list of
				supported <parity>s)
			• OK
			• ERROR
	This extended-format compound parameter is used to determine the
	local serial port start-stop (asynchronous) character framing used by the
	DCE to accept DTE commands, and while transmitting information text
	and result code, if this is not automatically determined; (Not
	supported) +IPR=0 forces +ICF=0 (see +IPR).
	<format>	Description
	3	8 Data 1 Stop. Default value
202

LZT 123 7263 R1C