Sony Ericsson GM47, GM48 manual 24 AT+CMER Mobile Equipment Event Reporting, At+Cmer?, At+Cmer=?

3. CONTROL AND STATUS

3.24 AT+CMER Mobile Equipment Event Reporting

Description	Command	Possible Responses
Set Phone	AT+CMER=[<mode>	• +CME ERROR: <err>
Activity Status	[,<keyp>[,<disp>	• OK
	[,<ind>[,<bfr>]]]]]	• ERROR
Show the current	AT+CMER?	• +CMER:
setting		<mode>,<keyp>,<disp>,
		<ind>,<bfr>
		• OK
		• ERROR
Show if the	AT+CMER=?	• +CMER: (list of supported s),
command is		(list of supported
supported		<keyp>s),(list of supported
		<disp>s),(list of supported
		<ind>s),(list of supported
		<bfr>s)
		• OK
		• ERROR

The command enables or disables the sending of unsolicited result codes from the ME to the TE in the case of key pressings, display changes, and indicator state changes. <mode> controls the processing of unsolicited result codes specified within this command. <bfr> controls the effect on buffered codes when <mode> 1, 2 or 3 is entered. If the ME does not support setting, +CME ERROR: <err> is returned.

Test command returns the modes supported by the TA as compound values.

<mode>	Description
0	Buffer unsolicited result codes in the TA; if TA result code
	buffer is full, codes can be buffered in some other place
	or the oldest ones can be discarded
3	Forward unsolicited result codes directly to the TE; TA-TE
	link specific inband technique used to embed result
	codes and data when TA is in on-line data mode
<keyp>	Description
0	No keypad event reporting
2	Keypad event reporting using result code +CKEV:
	<key>,<press>. Enables keypad event reporting of all key
	pressings
	Note: When this mode is enabled, corresponding result
	codes of all keys currently pressed will be flushed to the TA
	regardless of <bfr> setting
<disp>	Description
0	No display event reporting

117

LZT 123 7263 R1C