Sony Ericsson GM48, GM47 10.8 AT+CGSN Read MS Product Serial Number Identification, 10.9 AT+GMI

GM47/GM48 INTEGRATOR’S MANUAL

10.8 AT+CGSN	Read MS Product Serial Number Identification
	Description		Command	Possible Responses
	Request product serial		AT+CGSN	• <sn>
	number			• +CME ERROR: <err>
	Show if the command		AT+CGSN=?	• OK
	is supported			• ERROR
	This command causes the MS to return the IMEI (International Mobile
	station Equipment Identity), which identifies the individual ME.
	<sn>	Description
	String	The IMEISV, which is the IMEI (International Mobile station
		Equipment Identity; refer GSM 03.03) number of the ME and the
		software version number. Text shall not contain the sequence
		0<CR> or OK<CR>
10.9 AT+GMI	Read Manufacturer Identification
	Description		Command	Possible Responses
	Request manufacturer		AT+GMI	<manufacturer>
	identification
	Show if the command		AT+GMI=?	• OK
	is supported			• ERROR

This command causes the DCE to transmit one or more lines of information text. Typically, the text will consist of a single line containing the name of the manufacturer, but may provide more information such as address and telephone number for customer service.

<manufacture>	Description
string type	The total number of characters, including line
	terminators, in the information text returned in response
	to this command shall not exceed 2048 characters.
	Note that the information text shall not contain the
	sequence “0” or “OK”, so that DTE can avoid false
	detection of the end of this information text

186

LZT 123 7263 R1C