Sony Ericsson GM48 15.11 AT+CMGR Read Message, Display cell broadcast messages AT+CNMI=3,0,2,0,0

GM47/GM48 INTEGRATOR’S MANUAL

Example

Display cell broadcast messages:

AT+CNMI=3,0,2,0,0

15.11 AT+CMGR Read Message

PDU Mode

Description	Command	Possible Responses
Read	AT+CMGR=	• +CMGR: <stat>,[<alpha>],<length>]
message	<index>	<CR><LF><pdu>
		• +CMS ERROR: <err>
		• OK
		• ERROR
Show if the	AT+CMGR=?	• OK
command is		• ERROR
supported

Returns message with location value <index> from preferred message storage <mem1> to the TE. Status of the message and entire message data unit <pdu> is returned. If status of the message is ‘received unread’, status in the storage changes to ‘received read’. If reading fails, final result code +CMS ERROR: <err> is returned.

<stat>	Description
0	Received unread message (i.e. new message)
1	Received read message
2	Stored unsent message (only applicable to SMs)
3	Stored sent message (only applicable to SMs)
<index>	Description
Integer type	Value in the range of location numbers supported by the
	associated memory
<alpha>	Description
String type	Manufacturing specific. Should be left empty but not
	omitted
<length>	Description
Integer type	Value indicating in PDU mode (+CMGF=0), the length of
	the actual TP data unit in octets (i.e. the RP layer SMSC
	address octets are not counted in the length)

268

LZT 123 7263 R1C