Sony Ericsson GM47, GM48 manual +Cbm

15. SHORT MESSAGE SERVICES - POINT TO POINT

<mt>	Description
0	No SMS-DELIVER indications are routed to the TE.
	No class, Class 0, class 1 and class 3 use <mem3> as
	preferred storage. Class 2 messages shall be stored in the
	SIM. If it this is not possible then the MS shall send an error
	message accordingly to GSM 03.38
1	SMS-DELIVER is stored into ME/TA and the indication of the
	memory location is routed to the TE using unsolicited result
	code:
	+CMTI: <mem>,<index>
2	Class 0, class 1, and class 3 SMS-DELIVERs are routed
	directly to the TE using the unsolicited result code:
	+CMT:<oa>, [<alpha>, <scts> [ ,<tooa>,<fo>,<pid>,<dcs>,
	<sca>,<tosca>,<length>]<CR><LF><data> (text mode
	enabled). About parameters in italics, refer to the show
	text mode command, +CSDH
3	Class 3 SMS-DELIVERs are routed directly to TE using
	unsolicited result codes +CMT:<oa>, [<alpha>, <scts> [
	,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<length>]<CR>
	<LF><data> (Text Mode enabled). About parameters in
	italics, refer to the show text mode command, +CSDH.
	Messages of other data coding schemes result in
	indication as defined in <mt>=1
<bm>	Description
0	Store message to “BM” (or some manufacturer specific
	memory). No CBM indications are routed to the TE
2	New CBMs are routed directly to the TE using unsolicited
	result code:
	+CBM:
	<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
	(Text mode enabled)
<ds>	Description
0	No SMS-STATUS-REPORTs are routed to the TE
1	SMS-STATUS-REPORTs are routed to the TE using unsolicited
	result code: : +CDS:
	<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st> (Text mode
	enabled). SMS-STATUS-REPORT is not stored in ME/TA
2	SMS-STATUS-REPORTs are routed to the TE using unsolicited
	result code: +CDSI: < mem><index> (Text mode enabled).
	SMS-STATUS-REPORT is stored in ME/TA

Unsolicited Result codes:

+CMT:<oa>, [<alpha>, <scts> [,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<length>]<CR><LF> <data> (Text Mode enabled). Refer to the show text mode command, +CSDH for information on the parameters in italics.

+CMTI: <mem>,<index>

+CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>

+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>

+CDSI: <mem><index>

267

LZT 123 7263 R1C