Sony Ericsson GM48, GM47 manual 10 ATS10 Automatic Disconnect Delay Control, At*Ecam?, At*Ecam=?

GM47/GM48 INTEGRATOR’S MANUAL

3.10 ATS10	Automatic Disconnect Delay Control
	Description		Command	Possible Responses
	Set Automatic		ATS10=[<val>]	•	OK
	Disconnect Delay			•	ERROR
	Control
	Show the current		ATS10?	<val>
	setting
	Show if the command		ATS10=?	S10: (list of supported
	is supported			<val>s)
	Included for compatibility. No functionality
	<val>	Description
	2	Remains connected for two tenths of a second. Default value
	1-254	Number of tenths of a second of delay
3.11 AT*ECAM	Ericsson Call Monitoring
	Description		Command	Possible Responses
	Set Call Monitoring on		AT*ECAM=<onoff>	•	+CME ERROR: <err>
	or off			•	OK
				• ERROR
	Show the current		AT*ECAM?	•	*ECAM: <onoff>
	setting			•	+CME ERROR: <err>
				• OK
				• ERROR
	Show if the command		AT*ECAM=?	•	*ECAM: list of
	is supported				supported <onoff>s

• +CME ERROR: <err>

• OK

• ERROR

This command activates or deactivates the call monitoring function in the ME. When this log function is activated in the ME, the ME informs about call events, such as incoming call, connected, hang up etc.

It is preferable that the current status shall always be sent with result code *ECAV when activating the log function. The purpose of this is two fold:

• to gather relevant information for the call log in a TE;

106

LZT 123 7263 R1C