Sony Ericsson GM48, GM47 manual 266

GM47/GM48 INTEGRATOR’S MANUAL

+CMT: <length><CR><LF><pdu>

+CMTI: <mem>,<index>

+CBM: <length><CR><LF><pdu>

+CDS: <length><CR><LF><pdu>

+CDSI: <mem><index>

Text Mode

Description	Command	Possible Responses
Set new message	AT+CNMI=[<mode>	• +CMS ERROR: <err>
indication to TE	[,<mt>[,<bm>[,<ds>	•	OK
	]]]]	• ERROR
Show the current	AT+CNMI?	•	+CNMI:
setting			<mode>,<mt>,<bm>,<ds>
		• OK
		• ERROR
Show if the	AT+CNMI=?	•	+CNMI:
command is			(list of supported <mode>s),
supported			(list of supported <mt>s),
			(list of supported <bm>s),
			(list of supported <ds>s)

• OK

• ERROR

Selects the procedure for the way in which new messages received from the network, are indicated to the TE when it is active, e.g. DTR signal is ON. If TE is inactive (DTR signal is OFF), message receiving is carried out as specified in GSM 03.38 (3G TS 23.038).

If the command fails and the error is related to mobile equipment or network, the final result code CMS ERROR: <err> is returned.

<mode>	Description
3	Forward unsolicited result codes directly to the TE. TA-TE
	link specific inband technique used to embed result
	codes and data when TA is in on-line data mode

266

LZT 123 7263 R1C