BASIC OPTIONS

2.Activate the alarm via the SH624 Comfort Remote Control

Press the red PANIC button. The panic alarm is instantly triggered. Depending on the console settings the siren will be triggered or not (see 9.1).

6.3What happens when the alarm goes off?

1.Siren

The built-in siren will be triggered. You can choose to turn the siren off (silent alarm, see 9.1). If the console is working on the emergency batteries, the siren will not be used, to save battery power.

2.The telephone dialler

After the last digit of the first telephone number has been dialled, the spoken message will be played back and repeated several times. If the call is answered by pressing 0, the console will stop calling. If the call is not answered, the second up to the sixth number are dialled until one of these calls is confirmed by pressing 0. The person who receives the phone call can listen to what is going on in the building for one minute. The siren is switched off while you are listening.

The console will remain on alert. If the alarm goes off again later, the telephone dialler will be activated again.

6.4 Disarming the system

Press DISARM on your remote control. The display will indicate the zone that is causing the alarm. To remove this message, press ARM and then DISARM.

You can also switch off the system by entering your PIN code on the number pad of the console. After entering your PIN code the display will read ‘DISARMED’.

6.5 Error messages

If a zone number is slowly flashing on the display, this means the system has noticed an error with that sensor. Possible causes are empty batteries (see chapter 12), range problems (1.2) or the sensor has been tampered with (opened up).

The status of all sensors is checked after the security system is switched on. If a problem is found, you will hear the two-tone ‘problem signal’. If a sensor (e.g. zone 9) indicates there is a problem, a message is shown on the display.

An open window or door: A tamper message:

Empty batteries or range problems:

OPEN ZONE 9 TAMPER ZONE 9 PROBLEM ZONE 9

You need to solve the tamper problem before switching on the system (e.g. by closing the top compartment on the console).

Both the console and the DS90 and MS90 are equipped with a tamper contact. If anyone tries to open the console or sensor while the alarm is activated, the alarm will be triggered. If the alarm is NOT activated, you will see an error message on the console display.

In all other cases you can choose not to activate the sensor concerned (bypass). You need to press CLEAR while the error message is shown and then activate the alarm again. The zone indicator of the sensor concerned will now flash quickly.

If there are more sensors causing problems, the information on the next sensor will be displayed.

The bypass is valid until you switch off the alarm (Disarm).

SAFEGUARD / TOTALGUARD

21

Page 21
Image 21
Marmitek TOTALGUARD What happens when the alarm goes off?, Disarming the system, Error messages, Siren, Telephone dialler

TOTALGUARD specifications

Marmitek TOTALGUARD is a comprehensive security solution designed to enhance the safety and security of homes and businesses. This advanced system integrates cutting-edge technologies to provide a robust protective measure against unauthorized access, theft, and other security threats.

One of the standout features of TOTALGUARD is its user-friendly interface. The system is designed for simplicity, allowing users to easily control and monitor their security settings via a dedicated mobile app. This app offers real-time notifications and allows users to receive alerts about any suspicious activities, ensuring immediate response to potential threats.

TOTALGUARD employs a range of high-tech sensors and cameras that deliver high-definition video surveillance around the clock. Its motion detection capabilities are finely tuned, allowing the system to differentiate between normal activity and potential intrusions. This minimizes false alarms, giving users peace of mind that their property is protected without the constant interruptions of unnecessary alerts.

The system is also equipped with smart home integration features, making it compatible with popular smart home devices. This connectivity means that homeowners can integrate their security system with other elements of their smart home – such as lighting and climate control – to create a comprehensive safety net. When an alert is triggered, smart lights can turn on to deter intruders, and connected devices can alert users to any unusual activity in their vicinity.

One of the key characteristics of the TOTALGUARD system is its scalability. Whether you live in a small apartment or manage a large commercial facility, the system can be expanded by adding more sensors, cameras, and modules as needed. This adaptability makes it an ideal choice for a variety of users and settings.

In addition, TOTALGUARD features advanced encryption protocols that ensure the security of data transmission between devices, safeguarding sensitive information from cyber threats. This level of security is crucial in today's digital landscape where security breaches can occur remotely.

Lastly, the Marmitek TOTALGUARD system is designed to be easily installed without the need for professional assistance, making it accessible to a wide range of consumers. With its combination of advanced technology, ease of use, and flexibility, TOTALGUARD represents a formidable solution for anyone looking to enhance their security measures in an increasingly uncertain world.