EXTRA OPTIONS

Key Chain Remote Control KR21 – 2x CR2016 batteries

De KR21 wordt geleverd met volle batterijen. Wanneer de indicator op de KR21 zwak gaat branden, dienen de batterijen vervangen te worden.

•A new KR21 contains fully charged batteries. If the indicator light on the KR21 is not very bright, the batteries should be replaced.

•Open the remote control (back) with your nails or a small screwdriver. Use CR2016, 3V lithium batteries (2x).

•To retain the unique code for your remote control, the batteries need to be replaced within 30 seconds.

•If after replacing the batteries the console does not respond to your remote control, press the ARM button on your remote control for 4 seconds to reactivate the remote. Then release the button. You now need to reregister the remote control, using the procedure described in 3.1.2.

☺When pressing the ARM button the LED should flash quickly a few times. When the LED lights up and stays lit, you need to reactivate the KR21.

☺To avoid losing a memory space, you can remove the old code for your remote control from the memory (see 8.2).

Comfort Remote Control SH624 – 4x AAA batteries

Wanneer de indicator op de SH624 zwak gaat branden, dienen de batterijen vervangen te worden.

•If the indicator light on the SH624 is not very bright, the batteries should be replaced.

•First set the switch on the front of the remote control to SEC. Now open the battery compartment on the back of the remote control and replace the batteries within 30 seconds.

•If the console does not respond to your remote control after replacing the batteries, press the PANIC button on your remote control. You now need to reregister the remote control, using the procedure described in 3.1.2.

☺To avoid losing a memory space, you can remove the old code for your remote control from the memory (see 8.2).

Door/Window Sensor DS90 – 2x AAA batteries

The console checks the battery status of the DS90 sensor. If the batteries are too weak, the console will indicate a ‘PROBLEM’ and the zone number will flash.

•Normally the unique code of the sensor will remain in the memory (if you replace the batteries within 30 seconds). After replacing the batteries you can check whether the sensor still has its unique code. You do this by opening the door or window. If the sensor has remembered its code, the console display will read ZONE x OPEN (zone number for x). If nothing happens, the door/window sensor needs to be reregistered (see 4.1.3). Delete zones you do not use anymore (see 9.6) or install the sensor in the same zone as before.

Motion Detector MS90 – 2x AA batteries

The console checks the battery status of the MS90 sensor. If the batteries are too weak, the console will indicate a ‘PROBLEM’ and the zone number will flash.

•Normally the unique code of the sensor will remain in the memory (if you replace the batteries within 30 seconds). You can check this by setting your system to ARMED AWAY. If the sensor has remembered its code, the alarm will go off when you walk past the sensor. If nothing happens, you need to reregister the motion detector (see 4.2.3). Delete the zone (see 9.7) and reregister the sensor (see 4.2.3).

SAFEGUARD / TOTALGUARD

35

Page 34 Page 36
Page 35
Image 35
Marmitek TOTALGUARD manual Key Chain Remote Control KR21 2x CR2016 batteries, Comfort Remote Control SH624 4x AAA batteries
Page 34 Page 36

TOTALGUARD specifications

Marmitek TOTALGUARD is a comprehensive security solution designed to enhance the safety and security of homes and businesses. This advanced system integrates cutting-edge technologies to provide a robust protective measure against unauthorized access, theft, and other security threats.

One of the standout features of TOTALGUARD is its user-friendly interface. The system is designed for simplicity, allowing users to easily control and monitor their security settings via a dedicated mobile app. This app offers real-time notifications and allows users to receive alerts about any suspicious activities, ensuring immediate response to potential threats.

TOTALGUARD employs a range of high-tech sensors and cameras that deliver high-definition video surveillance around the clock. Its motion detection capabilities are finely tuned, allowing the system to differentiate between normal activity and potential intrusions. This minimizes false alarms, giving users peace of mind that their property is protected without the constant interruptions of unnecessary alerts.

The system is also equipped with smart home integration features, making it compatible with popular smart home devices. This connectivity means that homeowners can integrate their security system with other elements of their smart home – such as lighting and climate control – to create a comprehensive safety net. When an alert is triggered, smart lights can turn on to deter intruders, and connected devices can alert users to any unusual activity in their vicinity.

One of the key characteristics of the TOTALGUARD system is its scalability. Whether you live in a small apartment or manage a large commercial facility, the system can be expanded by adding more sensors, cameras, and modules as needed. This adaptability makes it an ideal choice for a variety of users and settings.

In addition, TOTALGUARD features advanced encryption protocols that ensure the security of data transmission between devices, safeguarding sensitive information from cyber threats. This level of security is crucial in today's digital landscape where security breaches can occur remotely.

Lastly, the Marmitek TOTALGUARD system is designed to be easily installed without the need for professional assistance, making it accessible to a wide range of consumers. With its combination of advanced technology, ease of use, and flexibility, TOTALGUARD represents a formidable solution for anyone looking to enhance their security measures in an increasingly uncertain world.
Top Page Image Contents