Sony Ericsson GM48, GM47 manual 15.9 AT+CMGC Send Command, At+Cmgc=?

GM47/GM48 INTEGRATOR’S MANUAL

15.9 AT+CMGC	Send Command
PDU Mode
	Description	Command	Possible Responses
	Send command	AT+CMGC=<length><CR>	• if PDU mode
	message	<pdu><ctrl-Z/ESC>	(+CMGF=0) and
			sending successful:
			+CMGC:
			<mr>[,<ackpdu>]
			• if sending fails:
			+CMS ERROR: <err>
			• OK
			• ERROR
	Show if the	AT+CMGC=?	• OK
	command is		• ERROR
	supported

Sends a command message from a TE to the network (SMS- COMMAND). The entering of PDU is as specified in the send message command, +CMGS. Message reference value <mr> is returned to the TE on successful message delivery. Optionally (when +CSMS <service> value is 1 and network supports) <ackpdu> is returned. Values can be used to identify message upon unsolicited delivery status report result code. If sending fails in a network or an ME error, final result code +CMS ERROR: <err> is returned. This command is abortable.

<length>	Description
Integer type	Value indicating in PDU mode (+CMGF=0), the length of
	the actual TP data unit in octets (i.e. the RP layer SMSC
	address octets are not counted in the length)
<pdu>	Description
String	In the case of SMS: GSM 04.11 SC address followed by
	GSM 03.40 TPDU in hexadecimal format: ME/TA converts
	each octet of TP data unit into two IRA character long
	hexadecimal number (e.g. octet with integer value 42 is
	presented to TE as two characters 2A (IRA 50 and 65))
	In the case of CBS: GSM 03.41 TPDU in hexadecimal format
<mr>	Description
Integer type	GSM 03.40 TP-Message-Reference in integer format
<ackpdu>	Description
String	GSM 03.40 RP-User-Data element of RP-ACK PDU; format is
	same as for <pdu> in case of SMS, but without GSM 04.11
	SC address field and parameter shall be bounded by
	double quote characters like a normal string type
	parameter

262

LZT 123 7263 R1C