Sony Ericsson GM48, GM47 manual 13.17 AT*E2NBTS Ericsson M2M Neighbour BTS, AT*E2NBTS?, AT*E2NBTS=?

GM47/GM48 INTEGRATOR’S MANUAL

13.17 AT*E2NBTS Ericsson M2M Neighbour BTS

Description	Command	Possible Responses
Set Neighbour	AT*E2NBTS=<ch1>,<bsic1>[,<ch2	•	ERROR
Cells to monitor	>,<bsic2>[,<ch3>,<bsic3>[,<ch4	•	OK
	>,<bsic4>[,<ch5>,<bsic5>[,<ch6
	>,<bsic6>[,<ch7>,<bsic7>[,<ch8
	>,<bsic8>[,<ch9>,<bsic9>[,<ch1
	0>,<bsic10>[,<ch11>,<bsic11>[,<
	ch12>,<bsic12>[,<ch13>,<bsic13
	>[,<ch14>,<bsic14>[,<ch15>,<bsi
	c15>[,<ch16>,<bsic16>]]]]]]]]]]]]]
	]]
Show the	AT*E2NBTS?	•	*E2NBTS:
current setting			<mcc>,<mnc>,
			<ci>,<bsic>,<ch>,
			<rxl><CR><LF>
			<mcc>,<mnc>,
			<ci>,<bsic>,<ch>,
			<rxl><CR><LF>
			…
			<mcc>,<mnc>,
			<ci>,<bsic>,<ch>,
			<rxl><CR><LF>
			<CR><LF>
		• OK
		• ERROR
Show if the	AT*E2NBTS=?	•	*E2NBTS: (list of
command is			supported <ch>s)
supported		•	ERROR

The set command shall provide with the ARFCNs (<ch>) and the BSIC (the BSIC is a cell colour code) to the MS in order to monitor those channels, belonging to the neighbour cells, instead of the ones that come through the air interface, in the serving cell information broadcast channel.

It is possible to update that information with up to 16 neighbour cells. If less than 16 <ch>s are provided, then the assigned channels shall substitute the last previous channel (given either by the BCCH or by another AT*E2NBTS command), if it is not in the list yet. Therefore, <ch1>,<bsic1> will substitute BTS 16 in the MS, <ch2>,<bsic2> to the BTS 15 and so on. If any of the <ch>s is already in the top-list, then it is skipped.

The read command displays the data of every neighbour cell, including the following parameters: MCC, MNC, Cell ID, BSIC, Channel and Rx Level.

<ch>	Description
(0-1023)	It represents the ARFCN that shows the Absolute RF
	Channel, which identifies a BCCH carrier

232

LZT 123 7263 R1C