Sony Ericsson GM48, GM47 18.15 AT+CLIR Calling Line Identification Restriction, +CLIP number,type

GM47/GM48 INTEGRATOR’S MANUAL

+CLIP: <number>,<type>

<number>	Description
String type	String type phone number of format specified by <type>
<type>	Description
Integer format	Type of address octet in integer (refer to GSM 04.08 sub-
	clause 10.5.4.7)

Example

AT+CLIP=1

OK

RING

+CLIP: “07747008670”,129,,,“Matt L”,0

18.15 AT+CLIR	Calling Line Identification Restriction
	Description	Command	Possible Responses
	Request calling line	AT+CLIR=[<n>]	•	+CME ERROR <err>
	identification restriction		•	OK
			• ERROR
	Show the current	AT+CLIR?	•	+CLIR: <n>,<m>
	setting		•	+CME ERROR <err>
			• OK
			• ERROR
	Show if the command	AT+CLIR=?	• +CLIR: (list of supported
	is supported			<n>s)

• +CME ERROR <err>

• OK

• ERROR

This command refers to CLIR-service according to GSM 02.81 that allows a calling subscriber to enable or disable the presentation of the CLI to the called party when originating a call.

Set command overrides the CLIR subscription (default is restricted or allowed) when temporary mode is provisioned as a default adjustment for all following outgoing calls. Using the opposite command can revoke this adjustment. If this command is used by a subscriber without provision of CLIR in permanent mode the network will act according GSM 02.81.

The setting shall be per logical channel.

326

LZT 123 7263 R1C