Sony Ericsson GM47, GM48 manual 12 AT*ERIL Ericsson Ring Level Set, AT*ERIL? Eril, At*Eril=?

4. AUDIO

4.12 AT*ERIL	Ericsson Ring Level Set
	Description	Command	Possible Responses
	Sets ring volume for the	AT*ERIL=<volume>[,<c	•	+CME ERROR: <err>
	ring signals used for	all type>	•	OK
	incoming voice (L1	[,<place>]]	• ERROR
	and L2), fax and data
	calls
	Show the current	AT*ERIL?	•	*ERIL:
	setting			<volume1>[,<call
				type1> [,<place1>
				[<CR><LF>…*ERIL:
				<volume n>[, <call
				type n> [,<place
				n>]]]]]
			•	+CME ERROR: <err>
			• OK
			• ERROR
	Show if the command	AT*ERIL=?	•	*ERIL: (list of
	is supported			supported
				<volume>s)[,(list of
				supported <call
				type>s)
				[,(list of supported
				<place>s)]]
			•	+CME ERROR: <err>
			• OK
			• ERROR

Used to set the volume for the ring signals used for incoming voice, Line 1, Line 2, fax and data calls. The parameter <place> controls the ring level set for different types of modes. The signal volume is specified as “step”, with an increasing volume for each signal, or as a selected level.

Line 1 is the default for <call type> if the parameter is not given.

<volume>	Description
0	Off
1-6	Volume setting, not increasing ring
129-134	Volume setting, increasing ring
<calltype>	Description
1	Line 1
2	Line 2
3	Fax
4	Data
5	Alarm. Not supported

145

LZT 123 7263 R1C