Sony Ericsson GM47, GM48 manual Text is entered ctrl-Z/ESC

15. SHORT MESSAGE SERVICES - POINT TO POINT

Text Mode

Description	Command	Possible Responses
Send command	AT+CMGC=<fo>,<ct>[,<pid>	• if PDU mode
message	[,<mn>[,<da>[,<toda>]]]]	(+CMGF=1) and
	<CR>	sending successful:
	Text is entered<ctrl-Z/ESC>	+CMGC:
		<mr>[,<scts>]
		• if sending fails:
		+CMS ERROR: <err>
		• OK
		• ERROR
Show if the	AT+CMGC=?	• OK
commands is		• ERROR
supported

Sends a command message from a TE to the network (SMS- COMMAND). The entering of text is as specified in the send message command, +CMGS, but the format is fixed to be a sequence of two IRA character long hexadecimal numbers, which the ME/TA converts into 8-bit octets (refer to +CMGS). Message reference value <mr> is returned to the TE on successful message delivery. Optionally, when +CSMS <service> value is 1 and there is network support, <scts> is returned. Values can be used to identify message upon unsolicited delivery status report result code. If sending fails in a network or an ME error, final result code +CMS ERROR: <err> is returned. This command is abortable.

<fo>	Description
0	First octet of SMS-DELIVER in integer format
1	First octet of SMS_SUBMIT in integer format
2	First octet of SMS-STATUS-REPORT in integer format
3	First octet of SMS-COMMAND in integer format
<ct>	Description
Integer	GSM 03.40 TP-Command-Type. Default value is 0
<pid>	Description
0-255	Protocol Identifier in integer format. Default value is 0,
	according to 07.05 section 9.2.3.9
<mn>	Description
Integer	GSM 03.40 TP-Message-Number

263

LZT 123 7263 R1C