Sony Ericsson GM48, GM47 manual 15.10 AT+CNMI New Message Indications to TE, At+Cnmi?, At+Cnmi=?

GM47/GM48 INTEGRATOR’S MANUAL

<da>	Description
String type	GSM 03.40 TP-Destination-Address Value in string format;
	BCD numbers (or GSM default alphabet characters) are
	converted to characters of the currently selected TE
	character (refer command +CSCS). Type of address given
	by <toda>
<toda>	Description
String type	GSM 04.11 TP-Destination- Address Type-of-Address octet
	in integer format (when first character of <da> is +(IRA 43)
	default is 145, otherwise default is 129
<mr>	Description
Integer type	GSM 03.40 TP-Message-Reference in integer format
<scts>	Description
String type	GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
	format (refer to <dt>)

15.10 AT+CNMI New Message Indications to TE

PDU Mode

Description	Command	Possible Responses
Set new message	AT+CNMI=[<mode>	• +CMS ERROR: <err>
indication to TE	[,<mt>[,<bm>[,<ds>	•	OK
	]]]]	• ERROR
Show the current	AT+CNMI?	•	+CNMI:
setting			<mode>,<mt>,<bm>,<ds>
		• OK
		• ERROR
Show if the	AT+CNMI=?	•	+CNMI:
command is			(list of supported <mode>s),
supported			(list of supported <mt>s),
			(list of supported <bm>s),
			(list of supported <ds>s)

• OK

• ERROR

Selects the procedure for the way in which new messages received from the network, are indicated to the TE when it is active, e.g. DTR signal is ON. If the TE is inactive (DTR signal is OFF), message receiving is carried out as specified in GSM 03.38 (3G TS 23.038).

264

LZT 123 7263 R1C