Sony Ericsson GM48, GM47 manual Text Mode, Esc

GM47/GM48 INTEGRATOR’S MANUAL

Text Mode

Description	Command	Possible Responses
Write message to	AT+CMGW [=<oa/da>	• +CMGW: <index>
memory	[,<tooa/toda>[,<stat>]]]	• +CMS ERROR: <err>
	<CR>	• OK
	Text is entered <ctrl-Z/
		• ERROR
	ESC>
Show if the command	AT+CMGW=?	• OK
is supported		• ERROR

Stores message (either SMS-DELIVER or SMS-SUBMIT) to memory storage <mem2>. Memory location <index> of the stored message is returned. By default message status will be set to ‘stored unsent’, but parameter <stat> allows also other status values to be given. The entering of text is done as specified in the send message command, +CMGS. If writing fails, final result code +CMS ERROR: <err> is returned.

Note! SMS-COMMANDs and SMS-STATUS-REPORTs cannot be stored in text mode.

<stat>	Description
2	Stored unsent message (only applicable to SMs)
<oa>	Description
String type	GSM 03.40 TP-Originating-Address Value in string format;
	BCD numbers (or GSM default alphabet characters) are
	converted to characters of the currently selected TE
	character (refer command +CSCS). Type of address given
	by <tooa>
<da>	Description
String type	GSM 03.40 TP-Destination-Address Value in string format;
	BCD numbers (or GSM default alphabet characters) are
	converted to characters of the currently selected TE
	character (refer command +CSCS). Type of address given
	by <toda>
<tooa>	Description
String type	GSM 04.11 TP-Originating-Address Type-of-Address octet
	in integer format (default refer <toda>)
<toda>	Description
String type	GSM 04.11 TP-Destination- Address Type-of-Address octet
	in integer format (when first character of <da> is +(IRA 43)
	default is 145, otherwise default is 129

256

LZT 123 7263 R1C