Sony Ericsson GM48, GM47 13.13 AT+COLP Connected Line Identification Presentation, Udi, At+Colp?

GM47/GM48 INTEGRATOR’S MANUAL

<numberx>	Description
String type	Phone number of format specified by <typex>
<typex>	Description
Integer format	Type of address, (refer to GSM 04.08 subclause 10.5.4.7)
<speed>	Description
data rate	As defined in subclause 6.7 GSM 07.07
<service>	Description
0	Asynchronous modem
4	Voice
5	Fax
<itc>	Description
0	3.1kHz
1	UDI

13.13 AT+COLP Connected Line Identification Presentation

Description	Command	Possible Responses
Request connected	AT+COLP=[<n>]	• OK
line identification		•	ERROR
presentation
Show the current	AT+COLP?	• +COLP: <n>,<m>
setting		•	OK
		• ERROR
Show if the command	AT+COLP=?	•	+COLP: (list of
is supported			supported <n>s)

• OK

• ERROR

This command refers to the GSM/UMTS supplementary service COLP (Connected Line Identification Presentation) that enables a calling subscriber to get the connected line identity (COL) of the called party after setting up a mobile originated call. The command enables or disables the presentation of the COL at the TE. It has no effect on the execution of the supplementary service COLR in the network.

226

LZT 123 7263 R1C