Jasco RM24927, RM94927 instruction manual Programming For Second Device, Cable, Rcvr

Programming For Second Device

If you have not programmed the AUDIO•AUX button for audio components, you can assign a second TV, DVD, CD play- er, VCR, Satellite System, or Cable Box to it.

1.Manually turn on the device you wish to control. Find the three digit code for the device you wish to program in the code list.

2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.

CODE

SEARCH

INDICATOR

LIGHT

AUX

3. Press and release the AUX button (The

INDICATOR LIGHT						(BLINK)
will blink then remain
lit.)	1		2		3
4. Enter the code	4		5		6
using the Number	7		8		9 (OFF)
Buttons. After your
code is entered, the			0
INDICATOR
LIGHT will turn off. If				ON•OFF
the code is not valid,
the INDICATOR
LIGHT will blink.
Check the code list and		CHAN +					ON•OFF
repeat process.					OR
5. Aim the remote at
the device you wish to			AUX CODE
control and press the
ON•OFF button. The
device should turn off.		TV		VCR	CABLE			DBS
6. With your device		CD		RCVR	LD			DVD
on, press CHAN+
(CHANNEL UP) or
ON•OFF button. If the

device responds, no further programming is required.

NOTE: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method.

7.Enter your code and the type of device you programmed here for easy reference.

11