Thank you for purchasing the GE Universal Remote Control. This product is designed to provide years of service operating a wide variety of video and audio equipment.
Please retain this guide for future reference.
Table of Contents
Install the Batteries | 1 |
Button Description | |
Programming for TV | 5 |
Programming for VCR | 6 |
Programming For DVD | 7 |
Programming For DBS System | 8 |
Programming For Cable | 9 |
Programming For Audio | 10 |
Programming For Second Device | 11 |
Operating Audio Function | |
Sleep Functions | 14 |
Programming With Code Search | 15 |
Identifying Codes For Your Remote | 17 |
Warranty | 18 |
Lost Codes | 18 |
This Universal Remote Control is already programmed for most GE, RCA and ProScan TVs, VCRs, DBS Systems, DVD Players, and Audio/Video Receivers.
NOTE: For users of GE, RCA and ProScan DBS Products, older DBS models require that the DISPLAY Button on this remote be used to make program selections. Use the SELECT Button for making program selections on newer GE, RCA and ProScan DBS models.
Battery Installation
Your Universal Remote Control requires 2 AAA alkaline batteries.
To install the batteries:
1.Turn the remote over and push down on the cover and slide it off.
2.Insert the batteries, matching the batteries to the
(+) mark inside the battery case.
3.Slide the battery cover back into place.
NOTE: Programmed codes will remain in memory for a short period of time allowing for battery replacement. If batteries have been dead for a pro- longed period of time, reprogramming may be required.
1
