Programming With Code Search
If your TV, VCR, DBS Satellite System, Cable Box or Audio System does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching your code by following the steps below:
1.Manually turn on the device you wish to program.
2.Press and hold the CODE SEARCH until the
INDICATOR LIGHT lights, then release CODE SEARCH.
CODE
SEARCH
INDICATOR
LIGHT
VCRTV
(BLINK)
3.Press and release the device button for the device you are program- ming. The INDICATOR LIGHT will blink once, then remain lit.
CBLAUDIO•AUX
SATDVD
ON•OFF
NOTE: For AUX program- |
|
|
|
|
|
|
|
|
ming carry out program- |
|
|
|
|
|
|
|
|
ming procedure on page |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
11 for the device you are |
|
|
|
|
|
|
| |
ENTER |
|
|
|
| ||||
| ||||||||
assigning to AUX prior to |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
starting a Code Search. |
|
|
|
|
|
|
| |
| OFF | |||||||
4.Press and release ON•OFF until your device turns off.
5.When your device turns off, press ENTER, the INDICATOR LIGHT will turn off.
15
