Programming For DBS Satellite System
Most GE, RCA and ProScan Satellite sys- tems will not require programming. Check to see if your DBS Satellite system responds to the remote before you begin program- ming.
1.Manually turn on the DBS system. Find the three digit code for your DBS
system in the code list below.
2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3.Press and release the DBS button (The INDI- CATOR LIGHT will blink then
remain lit.
4.Enter the code using the Number Buttons. After your code is entered, the INDICA- TOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at your DBS system and press the
ON•OFF button. Your DBS system should turn off.
CODE
SEARCH
INDICATOR
|
|
| LIGHT |
| SAT |
| |
|
|
| (BLINK) |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | (OFF) |
| 0 |
|
|
|
| ON•OFF | |
CHAN +
SATELLITE CODE
6.With your DBS System on, press CHAN+ (CHANNEL UP). If the satellite system responds, no further programming is required.
NOTE: If your DBS system does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method.
7. Enter your code here for easy reference.
8
