Programming For TV
Most GE, RCA and ProScan TVs will not require programming. Check to see if your TV responds to the remote before you begin programming.
1.Manually turn on the TV. Find the three digit code for your TV in the code list below.
2.Press and hold the CODE SEARCH but- ton
until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
SETUP
INDICATOR
LIGHT
TV
(BLINK)
3.Press and release the TV button (The
INDICATOR LIGHT will blink then remain lit.
4.Enter the code using the Number Buttons. After your code is entered, the
INDICATOR LIGHT will turn off. If the code is not valid, the
INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at your TV and press the ON•OFF button. Your TV should turn off.
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | (OFF) |
| 0 |
|
|
|
| ON•OFF |
|
CHAN +
TV CODE
NOTE: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method.
6.With your TV on, press CHAN+ (CHANNEL UP). If the TV responds, no further programming is required.
7.Enter your code here for easy reference.
5
