Epson 7000 service manual Fatal Errors, Fatal Error Code List, Code Description Refer to

EPSON Stylus Pro 7000 Revision B

FATAL ERRORS

Fatal error messages appear on the LCD panel to warn users that an unrecoverable error has occurred. However, in some cases the printer may recover if turned off and back on.

	Table 3-23. Fatal Error
Item	Description
LCD	Service Call nnnnnnnn
message
LED indicator	All LED indicators flash.
status
	A fatal error occurs for one of the following reasons.
	1) A problem occurred that the user cannot solve by himself.
Details	2) A maintenance part has exceeded its useful life and if not
	replaced may cause damage to the printer or printer parts.
	3) An illegal function was attempted or illegal command received
	and the operation is impossible.
	Turn off the printer and turn it back on. If the error does not
Recovery	recur, continue normal operation.
	If the same fatal error occurs when you turn the printer back on,
	see the following table and perform the necessary service.

Table 3-24. Fatal Error Code List

Code	Description	Refer to
		page
00000100	Waste ink pads are full	93
00000101	Ink tubes have reached their predetermined	93
00010000	PF motor/ encoder check error (out of step error)	93
00010001	PF motor/motor out of step	94
00010002	PF motor/overcurrent	94
00010003	PF motor/ in position time-out error	94
00010004	CR motor/ encoder check error (out of step error)	95

Table 3-24. Fatal Error Code List (continued)

Code	Description	Refer to
		page
00010005	CR motor/motor out of step	95
00010006	CR motor/overcurrent	96
00010007	CR motor/ in position time-out error	96
00010008	Servo watchdog time-out error	96
00010009	System watchdog time-out error	97
0001000A	CR home position sensor error	97
0001000B	PF home position sensor error	97
0001000C	Head slide (PG) home position sensor error	97
0001000D	Cover open sensor error (00)	97
0001000E	Cover open sensor error (01)	97
0001000F	CR motor/PWM output malfunction	97
00010010	PF motor/PWM output malfunction	97
00020000	NVRAM error	98
00020001	Internal RAM check error	98
00020002	SRAM check error	98
00020003	DRAM check error	98
0002000B	Mail box error (memory error)	98
10020004	CPU vector 4 general illegal instruction	98
10020006	CPU vector 6 slot illegal instruction	98
10020009	CPU vector 9 CPU address error	98
1002000A	CPU vector 10 DMAC/DTC address error	98
1002000B	CPU vector 11 watchdog time-out error	98
100200**	CPU vector 32~63 (incorrect trapping)	98

Troubleshooting Troubleshooting Using the Error Messages 92