EPSON Stylus Pro 7000

FEED ADJUSTMENT

This function adjusts the distance the printer feeds paper by correcting the printer’s distance-measurement setting.

1.Make sure "Adj. Feed" appears in the LCD, and press the Enter button.

2.The printer prints a check pattern (lines) while feeding the paper at a fixed distance.

3. After the pattern is printed, "V Length 1000.0mm" appears. Using a regular ruler (and the Scale Stopper, code number 1047746/1047745), measure the printed pattern from the top line to the bottom line. Then enter this measurement using the item select +/- buttons in 0.1mm increments.

4.After entering the measurement, press the Enter button to finish.

Printing Pattern

V Length: 1000.0mm

Use the item select Paper Feed [+] or [-] button to adjust the flushing position ("+" = to HP, "-" = away from HP)

[Enter]

Enter Adjust Print

[Enter]

[Pause]

End

adjustment/

next menu

Figure 5-33. Feed Distance Check Operation

Revision B

1000mm

Figure 5-34. Feed Distance Check Pattern

Adjustment

Self-Diagnostic Mode Menus

189

Page 189
Image 189
Epson 7000 service manual Feed Adjustment, Printing Pattern Length 1000.0mm, Enter Adjust Print, 1000mm