Epson 7000 service manual Rear Cover Removal, Two screws Optional

EPSON Stylus Pro 7000 Revision B

4.2.1.6 Rear Cover Removal

1.From the rear, remove two white screws (CPS:M3x12) securing the optional interface cover, and remove the optional interface cover.

Two screws

Optional	One
	screw
I/F cover
	(lower
	one)

Two screws

Figure 4-16. Interface Cover and Screw Removal

2.Remove the two white screws (CP:M3x6) securing the parallel interface and remove the one white screw (CBS:M3x6) securing the USB interface.

3.Remove the one white screw (CBS:M3x6) securing the AC inlet.

Three screws

4.Remove three white screws (CBS:M4x8) securing the lower section of the cover, and remove three white screws (CBS:M4x8) securing the upper section of the cover.

5.Remove the Rear Cover by pulling to the rear (lift and pull if necessary).

Rear	One
Cover	screw

Three screws

Figure 4-17. Rear Cover Removal

Disassembly & Assembly Disassembly Flow 118