Epson 7000 service manual „ Due to the printer’s size, when performing any service or

EPSON Stylus Pro 7000 Revision B

.

„Due to the printer’s size, when performing any service or

C A U T I O N

maintenance operations, confirm there is plenty of space for the operation.

„ Due to the printer’s size and weight, make sure any area

you move the printer to or any surface you place the printer on is stable.

„Since the EPSON Stylus Pro 7000 is quite heavy (approximately 43.5 Kg for the printer body plus another 8.5 Kg for the stand), be careful when handling it. When separating or setting up the printer body and stand, you need two people.

„When removing parts, ink may drip on the floor or lower sections of the printer. Therefore, spread a sheet or similar object when removing ink-related parts.

„When handling the electric circuit boards, do not touch the elements on the board by your bare hands to prevent the elements from being damaged by static electricity. Wearing an earth band is highly recommended.

„If it is necessary to turn on the printer after removing various covers, be especially careful around the carriage and fans to avoid injury.

„Keep in mind that the cutter blade is made of very hard material and may easily break if it contacts metal parts.

„If the printer needs to be transported for any reason, refer to Chapter 9 of the Users Guide to put the printer into printer-transport mode. Also, only use original packing materials and pack the printer as shown in the Start-Up Guide or Assembly and Setup Guide.

Maintenance General Maintenance Issues 205