Epson 7000 service manual Ink Low, Error Type Message Refer to, Lcd

EPSON Stylus Pro 7000 Revision B

Table 3-4. Warning/Error Messages

Error Type	Message	Refer to
Warning	Ink Low	page 99
	Paper Out	page 99
	Load xxx Paper	page 100
	Load Paper	page 100
	Paper Jam	page 100
	Cover Open	page 100
	Paper Not Cut	page 101
Error	Paper Not Straight	page 101
	Reload Paper	page 101
	Push Lever Down	page 102
	Ink Out	page 102
	No Ink Cartridge	page 102
	Remove Paper	page 103
	Option I/F Error	page 103

Note: “Maintenance Call nnnn” is described in Table 3-3.

WARNINGS

Warning messages appear on the LCD display to warn users that a problem may occur. The printer can still print and there is no effect on print quality; however the messages do not go away until the possible problem is taken care of or the printer enters the corresponding error condition. For example, the Waste Ink Pads Near Full message will remain until the pads are replaced and the counter is reset or until the pads become full and the printer enters an error state.

	Table 3-5. Ink Low
Item	Description
LCD	Ink Low
message
LED indicator	The LED indicator for the ink cartridge that is low flashes.
status
	The printer has received the Near-End signal from one of the ink
	low sensors. After the LCD displays the Ink Low warning, the
	printer can print about one A1 sheet at 100% duty. By all means,
Details	change the ink cartridge as soon as possible.
	Once a “low-ink” cartridge has been removed, it will
	automatically cause an ink-end error if replaced in the printer.
	Only replace empty or low cartridges with new, full cartridges;
	otherwise the ink counter cannot perform correctly.
Recovery	Replace the old ink cartridge with a new one.

Troubleshooting Troubleshooting Using the Error Messages 85