Epson 7000 service manual Printer Setting Menu, Display Message Options

EPSON Stylus Pro 7000 Revision B

1.6.1 Printer Setting Menu

Table 1-31. Printer Setting Menu

Display Message	Options	Notes
PLATEN GAP	Auto	Adjusts the platen gap. (Normally, leave
	Wide	set to Auto.)
		When Auto Cut Off is selected on the
PAGE LINE	ON	control panel, this setting determines
	OFF	whether a line for manual cutting is
		printed.
	Auto	Determines which interface the printer
		checks for data. Auto continuously
INTERFACE	Para/USB
		checks all interfaces and is good for
	Option
		normal use.
	Compat	Determines the data transfer rate when
PARA. I/F		using this interface.(Normally, leave set
	ECP
		to Compatible.)
CODE PAGE	PC437	Character code setting. (PC437:
	PC850	expanded graphics/PC850: multi-lingual)
		Roll sheet margin setting.
	T/B 15MM	• Top/Bottom 15mm*
		top and bottom margins = 15mm
ROLL MARG	15MM
		left and right margins = 3mm
	3MM
		• 15mm: all margins = 15mm
		• 3mm all margins = 3mm
PAPER SIZE CHK	ON	Determines whether the paper size check
	OFF	is enabled
PAPER ALIGN CHK	ON	Determines whether the paper skew
	OFF	check is enabled
INIT. PANEL	Exec.	Initializes control panel setup values to
		their defaults
Notes:

*The printed image is the same size whether the margin is 15mm or 3mm. The difference is 12mm of paper clearance is added to the top and bottom edges to make paper feeding more stable and to prevent the paper from rubbing the printheads.

The underlined item equals the default.

†Platen gap

You can adjust the platen gap using this option. (See “Platen Gap Mechanism” on page 70 for details.)

†Roll paper margin

T/B 15MM = the printed image is the same size whether the margin is 15mm or 3mm. The difference is 12mm of paper clearance is added to the top and bottom edges to make paper feeding more stable and to prevent the paper from rubbing the printheads.

If the print area is greater than the width of the printable area of the paper, the printer ignores the extra print data on the right side of the paper.

†Paper size check

You can disable the paper size check to prevent “RELOAD PAPER” errors which may occur when using very thin paper or paper with low reflective qualities such as tracing paper.

The print area is determined manually, and the printheads will fire ink onto the platen if the print area is set larger than the actual paper size.

Product Description SelecType Settings 41