Epson 7000 service manual BACKUP/DOWNLOAD Error Recovery, Range of Backed UP Parameters, End Error

EPSON Stylus Pro 7000 Revision B

BACKUP/DOWNLOAD ERROR RECOVERY

If an error occurs during the backup or download procedure, the following message appears on the LCD.

End [Error]

If you see the message above, one of the following errors has occurred.

„Flash memory/ write error

„Flash memory/ erase error

„PC card/ write error

„PC card/ erase error

Using a different PC card, try the operation again. If a different PC card does not solve the problem, there is a problem with the flash memory on the Main Board and a backup is not possible. Replace the Main Board

RANGE OF BACKED UP PARAMETERS

The following parameters on the C299 Main Board are backed up during the back up operation.

Flash ROM addresses 000~5FF (except for 120~13F)

†Head Rank

†Bi-D

†Head Gap

†Flushing Point (R)

†Feed correction

†P_REAR sensor position

†Capping position

†Adj Top/Bottom

Adjustment Adjustment Steps 161