Epson 7000 Holder Frame Cover-open Sensor One screw, M3x6 M4x6, Two Screws Six screws

EPSON Stylus Pro 7000 Revision B

9.Remove one screw (CUPS M3x6) securing the Cover-open sensor to the rear of the I/C Holder Frame. Then remove the Cover-open sensor.

I/C Holder Frame

Cover-open

sensor

One screw

One screw	One screw
(M3x6)	(M4x6)

Figure 4-51. Cover-Open Sensor & Holder Frame Removal - R side

10.Remove one screw (CUPS M3x6) and one screw (CUPS M4x6) securing the I/C Holder Frame on the right side.

11.Remove one screw (CUPS M3x6) and one screw (CUPS M4x6) securing the I/C Holder Frame on the left side.

I/C Holder

Frame

One screw

(M3x6)

One screw (M4x6)

Figure 4-52. Holder Frame Removal - L side

12.Remove six screws (CUPS M3x6) and two screws (CUPS M4x6) securing the I/C Holder Frame on the top.

Two

screws

Six screws

Figure 4-53. Holder Frame Removal - top

13.Remove the Ink Cartridge sensor cables from their harness connectors and separate them.

Disassembly & Assembly Disassembly Flow 138