Epson 7000 service manual Front Cover Removal, Spring catch Ring, Front cover Support shaft

EPSON Stylus Pro 7000 Revision B

4.2.1.9 Front Cover Removal

1.Open the Front Cover.

2.Push in the two hooks to the left of the cover and remove the front shaft cover.

Spring catch	E-ring	Front cover
		spring L

Front shaft	Shaft cover	Front cover
		support shaft
cover
	hooks x2

Figure 4-22. Front Cover Removal 1/3

3.On the right, remove the E-ring and the spring.

Front cover	E-ring	Spring catch
spring R

Front cover

support shaft

Figure 4-23. Front Cover Removal 2/3

4.Remove the two resin stopper clips (white plastic) from the front cover support shaft on the left, and then pull out the front cover support shaft to the left. Be aware that the front cover spring L and Front Cover come free at this time.

Front cover

support shaftFront cover

Two plastic

resin stoppers

Figure 4-24. Front Cover Removal 3/3

Push the front cover support shaft back to the left to insert the left plastic resin stopper.

5.Remove the Front Cover and front cover spring R from the front cover support shaft.

„Make sure you replace the front cover springs correctly.

„Confirm the movement of the cover and operation of the cover-open sensor. See “Cover Open Sensor Assembly” on page 200 for details.

Disassembly & Assembly Disassembly Flow 121