Epson 7000 service manual Removing the Flushing Box Assembly, Screw M3x6 Flushing Box Assembly

EPSON Stylus Pro 7000 Revision B

4.2.3.18 Removing the Flushing Box Assembly

1.Remove the Maintenance Assembly as described in “Removing the Maintenance Assembly” on page 143.

2.Using tweezers, remove the Cleaner Head from the Pump Assembly.

NOTE: Make sure the Cleaner Head surface is free from any dirt, dust, or grease. Also, when mounting it, use tweezers to keep the wiping side of the Cleaner Head clean.

3.Remove the one (CUPS M3x6) screw securing the Flushing Box Assembly and remove the Flushing Box Assembly.

Screw (M3x6)

Flushing Box

Assembly

Figure 4-75. Removing the Flushing Box Assembly

Disassembly & Assembly Disassembly Flow 149